The Keysight N7024A is a 6 GHz power rail probe engineered for precision measurement of noise, ripple, and transients on DC power supplies. It delivers mV-level sensitivity across a ±600 mV active signal range, enabling detection of subtle voltage deviations that compromise system performance. The probe’s 1.3:1 attenuation ratio and ±15.25 V offset range allow engineers to center signals at maximum vertical sensitivity for detailed analysis of power integrity across modern device architectures with tight voltage tolerances.
Technical Specifications
• Bandwidth: 6 GHz
• Attenuation Ratio: 1.3:1
• Input Dynamic Range: ±600 mV
• Offset Range: ±15.25 V
• Input Impedance (DC): 50 kΩ
• Probe Noise Floor: Adds 30% to baseline oscilloscope noise
• Cable Length: 1.2 m
– Key Features
• Low DC loading via 50 kΩ input impedance minimizes impact on the power rail under test
• Wide offset range enables signal centering at maximum vertical sensitivity
• 6 GHz bandwidth resolves high-speed transients that degrade clock and digital signal integrity
• AutoProbe 1 interface provides automatic probe configuration, offset control, and power delivery on compatible instruments
– Typical Applications
• Periodic and Random Disturbance (PARD) measurement
• Static and dynamic load response analysis
• Programmable power rail response characterization
– Compatibility & Integration
The N7024A connects directly to Keysight Infiniium S-Series, 9000, 90000A, 90000X, V-Series, Z-Series, and UXR (≤33 GHz) oscilloscopes via 50 Ω AutoProbe interface channels. Operation on 9000 and 90000A series instruments requires oscilloscope software version 6.50.00906 or higher. The probe includes pigtail coax cables (set of 3), probe tip kit, dual lead adapter, ground lead, ground spring, SMA adapter, rotating adapter, SMD micro grabber, color-coded rings, and main cable.
