The TDK-Lambda GEN 600-1.3 is a programmable DC power supply delivering 0–600 VDC at 0–1.3 A with 780 W maximum output. Built for precision measurement and test environments, it combines low noise performance with multiple control interfaces and fast transient recovery. The unit operates from single-phase 85–265 VAC input and includes standard RS-232/RS-485 connectivity with optional IEEE 488.2, LAN (LXI), USB, and isolated analog programming.
## Technical Specifications
**Output Performance**
• Voltage: 0 to 600 VDC
• Current: 0 to 1.3 A
• Maximum Power: 780 W
• Efficiency: 87% (typical)
• Voltage Ripple Noise: 0.06 Vrms (5 Hz to 1 MHz)
• Current Ripple Noise: 0.008 Arms (5 Hz to 1 MHz)
• Line Regulation (CV): ±0.01% of Vo + 2 mV
• Line Regulation (CC): ±0.01% of Io + 2 mA
• Load Regulation (CV): ±0.012% of Vo Rated
• Load Regulation (CC): ±0.04% of Io Rated
• Recovery Time (10–90% load step): Within 0.5% of rated output
• Voltage Programming Resolution: 16-bit DAC (0.012% of Vo Rated)
• Current Programming Resolution: 16-bit DAC (0.012% of Io Rated)
**Input**
• Voltage Range: 85–265 VAC, single-phase, continuous
• Frequency: 47–63 Hz
• Power Factor: 0.99 (typical)
## Key Features
• Over-voltage protection (OVP) and under-voltage limit (UVL) settings
• Current foldback control with CV-to-CC transition
• Auto-start and safe-start modes with last-setting memory
• Front-panel lock
• 31 selectable serial addresses
• Configurable baud rates: 1200, 2400, 4800, 9600, 19,200 bps
• 16-bit readback resolution for voltage and current (0.012% of rated)
• Analog programming: 0–5 V or 0–10 V selectable
## Compatibility & Integration
Standard interfaces include RS-232 and RS-485. Optional connectivity supports IEEE 488.2 (GPIB), LAN (LXI-compliant), USB, and isolated analog voltage/current programming. Remote control enables independent ON/OFF and enable/disable commands via serial or analog signals.
**Physical Form**
1U rack mount or benchtop: 214 mm (W) × 43.6 mm (H) × 437.5 mm (D); 4.5 kg
