The WaveSurfer 62XS-A is a 600 MHz, 2-channel digital oscilloscope built for circuit debugging, timing analysis, and signal characterization in development and field environments. It delivers 2.5 GS/s single-shot sampling, 50 GS/s in RIS mode, and 5 Mpts/channel record length—capturing up to 2 ms of continuous waveform data at full sample rate. The 10.4-inch color touch screen with 800 × 600 SVGA resolution provides clear waveform visualization, while WaveStream™ Fast Viewing Mode applies intensity grading to reveal jitter and low-probability anomalies. Eight-bit vertical resolution, ±1.5% DC gain accuracy above 10 mV/div, and dual input impedance options (1 MΩ || 16–20 pF or 50 Ω) accommodate both high-impedance and transmission-line measurements. Rise time of 500 ps supports fast edge analysis. Selectable 20 MHz and 200 MHz bandwidth limits reduce noise. The compact footprint conserves bench space without sacrificing acquisition capability.
Technical Specifications
• Bandwidth: 600 MHz
• Channels: 2
• Sample Rate: 2.5 GS/s (single-shot); 50 GS/s (RIS mode)
• Record Length: 5 Mpts/channel
• Capture Time: Up to 2 ms at full sample rate
• Vertical Resolution: 8-bit
• Vertical Sensitivity: 2 mV/div to 10 V/div (1 MΩ); 2 mV/div to 1 V/div (50 Ω)
• Vertical Accuracy: ±1.5% of full scale ≥ 10 mV/div (warranted)
• Input Impedance: 1 MΩ || 16–20 pF; 50 Ω
• Maximum Input: 400 V (1 MΩ); 5 Vrms (50 Ω)
• Rise Time: 500 ps
• Timebase: 200 ps/div to 1000 s/div; roll mode 500 ms/div to 1000 s/div
• Timebase Accuracy: ≤5 ppm @ 25 °C; ≤10 ppm @ 5–40 °C
• Display: 10.4-inch color TFT-LCD, 800 × 600, touch-enabled
– Key Features
• Edge, Glitch, Width, and Logic Pattern triggering
• TV triggering (NTSC, PAL, SECAM, HDTV 720p/1080i/1080p)
• DC, AC, and rejection (HFRej/LFRej) trigger coupling
• Pre-trigger (0–100% FS) and post-trigger (0–10,000 div) delay control
• Trigger hold-off to 20 s or 1 billion events
• 23 built-in measurements
• Optional advanced serial and mixed-signal trigger packages
– Typical Applications
• Timing margin and jitter analysis
• General-purpose analog circuit debugging
• Embedded system signal verification
• Glitch and anomaly detection
• Video signal measurement
– Compatibility & Integration
Optional trigger packages support LINbus, UART/RS232, I2C, SPI, and CAN protocols for embedded and automotive applications.
