The Agilent/Keysight DSO1022A is a 200 MHz, 2-channel digital storage oscilloscope engineered for signal acquisition and analysis across electronics testing, education, and research environments. This instrument delivers real-time waveform capture at up to 2 GSa/s per channel (single-channel mode) or 1 GSa/s per channel (dual-channel mode), with 20 kpts memory depth per channel in single-channel configuration. The 5.7-inch color LCD display with wide viewing angle provides clear signal visualization, while True zoom mode enables simultaneous viewing of main and magnified waveforms.
Technical Specifications
• Bandwidth: 200 MHz
• Analog Channels: 2
• Sample Rate: 2 GSa/s per channel (half channels); 1 GSa/s per channel (both channels)
• Acquisition Memory: 20 kpts per channel (half channels); 10 kpts per channel (both channels)
• Input Impedance: 1 MΩ ±1% in parallel with 18 pF ±3 pF
• Input Sensitivity: 2 mV/div to 10 V/div
• Maximum Input Voltage: 400V peak with 1.6 kVpk transient overvoltage (CAT I)
• Vertical Gain Accuracy: ±4.0% full scale (2–5 mV/div); ±3.0% full scale (10 mV/div–5 V/div)
• Hardware Frequency Counter: 6-digit
– Key Features
• 23 automatic measurements including frequency and peak-to-peak voltage
• Waveform math functions: addition, subtraction, multiplication, and FFT
• Advanced triggering modes: edge, pulse width, pattern, composite video, and alternate channel
• Sequence mode records and plays back up to 1000 captured waveforms
• Go/No-Go mask testing detects waveforms deviating from reference standards
• Peak detect captures glitches as narrow as 10 nsec
• Selectable averaging (2–256 runs) for noise reduction
• Digital band-pass and low-pass filtering
• Autoscale function optimizes vertical, horizontal, and trigger settings
• Manual or automatic measurement cursors
• Roll mode for continuous left-to-right waveform display
• Multi-language interface supporting 11 languages with integrated help
• Probe compensation output
– Typical Applications
Electronics troubleshooting, educational demonstrations, research signal analysis, and design validation.
– Compatibility & Integration
Two USB 2.0 host ports (front and rear) support data export to USB flash drives and firmware updates. Operates on 100–240V AC supply.
