The Teledyne LeCroy M42D is an 80 Gbps video analyzer purpose-built for DisplayPort 2.0, 1.4, and 2.1 compliance and functional testing. It combines transmit and receive capabilities across standard DisplayPort and USB-C interfaces, supporting link rates from 1.62 Gb/s legacy through 20 Gb/s per lane at 128b/132b line coding. The instrument handles Display Stream Compression with FEC, HDCP 2.2/3, MST, USB-C DP Alt Mode, and embedded DisplayPort 1.4b, making it suitable for source, sink, and repeater validation across consumer and mobile display ecosystems.
Technical Specifications
• DisplayPort versions: DP 2.0, DP 1.4, DP 2.1
• Maximum link rate: 80 Gbps (4 lanes at 20 Gbps per lane)
• Lane rates: 1.62, 2.7, 5.4, 8.1 Gb/s (legacy); 10.0, 13.5, 20.0 Gb/s (DP 2.0/2.1)
• Line coding: 128b/132b for DP 2.0/2.1
• Color depths: 8, 10, 12, 18 bits per component
• Video sampling: 4:4:4, 4:2:2, 4:2:0
• Audio: 8-channel LPCM programmable sine wave
• Capture memory: 8 GBytes
• Operating temperature: 0 to 40 °C
• Power: 100–240 VAC, 50–60 Hz, 200 W
• Dimensions: 24.30 cm W × 27.79 cm D × 8.74 cm H
• Weight: 5.057 kg
– Key Features
• Dual Tx/Rx on DisplayPort (HBR3 & 10G) and USB-C (UHBR)
• Passive probe technology for non-intrusive Main Link and Aux Channel monitoring
• 8 GBytes capture memory for extended signal acquisition
• HDCP 2.2/3 and Display Stream Compression validation
• eDP 1.4b testing with backlight control access
• Internal speaker for audio monitoring; dual RCA S/PDIF for audio injection/extraction
• Gigabit Ethernet port for remote GUI and instrument control
– Compatibility & Integration
HDMI Type A admin port supports external display connectivity. Four USB ports (front and rear) accommodate peripherals and external storage. Rack-mountable in 2 RU within 19-inch enclosures using provided brackets. ATP Manager and Vide software control platforms enable advanced test scenario programming and protocol analysis.
