The LeCroy T3DAQ1-16 is a 16-channel multi-purpose bench data acquisition switch unit built on a 6½ digit digital multimeter platform. It combines signal switching and routing with comprehensive measurement capabilities for automated testing, data logging, and signal conditioning across diverse laboratory environments. The unit features 12 multi-purpose scanner channels, 4 dedicated current channels, and one front-panel connector channel, each supporting DC/AC voltage, current, resistance, capacitance, frequency, period, and temperature measurements with True-RMS accuracy on AC ranges.
Technical Specifications
Measurement Ranges
• DC/AC Voltage (Scanner): 200 mV to 200 V
• DC/AC Voltage (Front Panel): 200 mV to 1000 V
• DC/AC Current (Scanner): 2 A fixed
• DC/AC Current (Front Panel): 200 µA to 10 A
• Resistance (2/4 Wire): 200 Ω to 100 MΩ
• True-RMS AC voltage and current across all ranges
Display & Memory
• 4.3-inch TFT LCD with dual-display modes: histograms, trends, bar graphs, statistics, and number mode
• 1 GB flash memory for configuration and data storage
Interfaces & Control
• USB Device, USB Host, LAN (10/100 Mbit), USBTMC
• SCPI command set for remote control via USB and LAN
• EasyDMM software control
Power & Environment
• Input: 100–120 VAC or 200–240 VAC at 45–66 Hz
• Maximum consumption: 25 VA
• Operating temperature: 0°C to +50°C
• Storage temperature: -20°C to +70°C
• Dimensions: 345.45 × 260.29 × 107.21 mm (L × W × H)
– Key Features
• 16-channel switching architecture with dedicated current measurement paths
• Built-in cold-terminal thermocouple compensation for temperature measurements
• Extended voltage range to 1000 V on front-panel connector
• Configurable display modes for real-time analysis and trending
• USB flash drive support for field data collection
– Typical Applications
• Research laboratory instrumentation
• Development and quality assurance testing
• Multi-point data acquisition and monitoring
• Automated test equipment (ATE) integration
– Compatibility & Integration
The unit connects via standard USB, LAN, and USBTMC interfaces, enabling integration with existing test infrastructure and control systems. SCPI command compatibility ensures compatibility with automated measurement workflows.
