The LeCroy WaveRunner 64MXi-A is a 600 MHz, 4-channel digital oscilloscope engineered for signal acquisition, debugging, and analysis across telecommunications, electronics, and R&D environments. This instrument delivers 5 GS/s real-time sampling per channel, scaling to 10 GS/s in interleaved mode and 200 GS/s in RIS mode, with 12.5 Mpts/Ch record length. The 10.4-inch color touch screen TFT-LCD display and compact 15 cm depth enable efficient bench deployment.
Technical Specifications
Acquisition Performance
• Analog Bandwidth: 600 MHz
• Real-time Sample Rate: 5 GS/s per channel; 10 GS/s interleaved; 200 GS/s RIS mode
• Record Length: 12.5 Mpts/Ch (25 Mpts interleaved)
• Vertical Resolution: 8 bits
• Vertical Sensitivity: 2 mV/div – 10 V/div (1 MΩ); 2 mV/div – 1 V/div (50 Ω)
• DC Gain Accuracy: ±1.0% of full scale
• Bandwidth Limits: 20 MHz, 200 MHz selectable
Input Specifications
• Maximum Input Voltage: 5 Vrms (50 Ω); 400 V max (1 MΩ, DC + Peak AC ≤ 5 kHz)
• Input Impedance: 1 MΩ, 50 Ω
• Input Coupling: AC, DC, GND
Timebase & Synchronization
• Real-time Timebase Range: 200 ps/div – 10 s/div
• Roll Mode: Up to 1000 s/div
• Timebase Accuracy: ≤5 ppm @ 25 °C; ≤10 ppm @ 5–40 °C
Triggering Architecture
• Trigger Modes: Normal, Auto, Single, Stop
• Trigger Sources: Any input channel, External, Ext/10, Line
• Trigger Coupling: DC, AC, HFRej, LFRej
• Pre-trigger Delay: 0–100% of full scale
• Post-trigger Delay: 0–10,000 divisions
• Hold-off Range: 1 ns to 20 s or 1 to 1,000,000,000 events
• Advanced Triggers: SMART Triggers; Serial Data Triggers (I2C, SPI, UART, RS-232, I2S/LJ/RJ/TDM, LIN, CAN, FlexRay, MIL-STD-1553)
• Specialized Triggers: Glitch (500 ps – 20 s), Runt, Interval (1 ns – 20 s), Edge Rate
Analysis Capabilities
• Advanced Math: Standard
• Jitter and Timing Analysis: Included
– Key Features
• 4-channel configuration for multi-signal correlation
• Deep memory enables extended waveform capture and post-acquisition analysis
• Serial protocol decoding across industrial and automotive buses
• Touch-screen interface with intuitive navigation
– Typical Applications
• Signal validation in telecommunications infrastructure
• Multi-channel circuit debugging in embedded systems
• Protocol analysis on I2C, SPI, UART, and CAN networks
• Jitter characterization and timing measurements
• Glitch and anomaly detection in digital and analog domains
– Compatibility & Integration
LeCroy (Teledyne LeCroy) manufacture. 50 Ω and 1 MΩ input paths support legacy and high-impedance measurement configurations.
