The Motorola WPLN4171A is a six-pocket multi-unit rapid charger engineered for simultaneous charging of Motorola authorized two-way radio batteries and radios in field operations and depot environments. It supports Nickel-Cadmium (Ni-Cd), Nickel-Metal Hydride (Ni-MH), and Lithium-ion (Li-ion) chemistries, delivering rapid charge cycles with real-time LED status indication per pocket. The charger operates from 100–240 VAC, 50/60 Hz mains supply and is designed for indoor dry-location installation where ambient temperature remains below 40 °C (104 °F).
Technical Specifications
• Charger Type: Multi-Unit Rapid Charger
• Charging Capacity: Up to 6 radios or batteries simultaneously
• Battery Chemistries Supported: Nickel-Cadmium (Ni-Cd), Nickel-Metal Hydride (Ni-MH), Lithium-ion (Li-ion)
• Power Input: 100–240 VAC, 50/60 Hz
• Maximum Operating Temperature: 40 °C (104 °F) ambient
• Charging Pockets: Six individual pockets with adjustable battery locating rails for standard and slim batteries
– Key Features
• LED Status Indicators: Each pocket displays real-time charging state via dedicated LEDs—single green blink (power-up), steady red (rapid charge), blinking green (taper phase ~90%), steady green (near/fully charged), blinking orange (queued, low voltage or thermal condition), blinking red (charge fault or poor contact), no indication (incorrect insertion)
• Flexible Battery Acceptance: Each pocket accommodates either a battery alone or a radio with installed battery
• Rapid Charging: Engineered for fast battery replenishment in high-duty-cycle communication operations
• Indoor Use Only: Rated for dry locations; main plug disconnect required for line voltage disconnection
– Compatibility & Integration
The WPLN4171A is compatible with Motorola commercial radio series CP, DEP, DP, EP, GP, PR, and XiR, charging authorized Motorola batteries and radios across these platforms. Adjustable pocket rails accommodate both standard and slim battery form factors. Specific compatible battery and radio models are documented in authorized Motorola reference materials.
– Safety & Operation
Power cord placement must prevent stepping, tripping, water exposure, or mechanical stress. Turn radio off before inserting battery. Unit is not user repairable. Connect only to appropriately fused and wired AC supplies of correct voltage.
