The Power Ten P62C-300-10 is a 3 kW programmable DC power supply engineered for industrial and laboratory applications demanding stable, regulated output. It delivers 0–300 VDC at 0–10 A, with switching-based architecture employing PWM and zero-crossing topology to achieve high efficiency and power density. Remote sensing, analog and digital control interfaces, and optional GPIB/RS-232 integration enable flexible system integration. Conservative thermal design and component derating ensure long-term field reliability.
Technical Specifications
• Output: 0–300 VDC, 0–10 A, 3000 W
• Input: 190–253 VAC, 47–63 Hz, three-phase; 15 A typical @ 208 VAC
• Line Regulation: 0.1% of maximum rated output over full AC input range at constant load
• Load Regulation: 0.5% of maximum rated output for 0–100% load variation at constant line voltage
• Stability: ±0.05% of set point per 8 hours after 30-minute warm-up at fixed line, load, and ambient temperature
• Transient Response: ±2% recovery within 10 ms for 30% current step load
• Ripple and Noise: Low peak-to-peak
• Voltage Readback Accuracy: ±(0.1% + 0.15% of full scale)
• Current Readback Accuracy: ±(0.1% + 0.4% of full scale)
– Key Features
• Remote voltage sensing to compensate for line drop at the load
• On/Off control via contact closure, 6–120 VDC (TTL/CMOS compatible)
• Output voltage and current monitor with OVP limit setting
• Summary fault status indication
• Isolated analog control option (AB) for floating reference systems
– Interfaces & Programming
• Programmable output voltage and current
• Optional IEEE 488.2 (GPIB) and RS-232 with SCPI protocol
• Slave mode option for multichannel control from single bus address
• Bus bar output interface with 0.390″ mounting holes (≤50 VDC models)
– Physical
• Rackmount: 3U configuration, 19″ W × 5.25″ H × 22″ D
• Weight: 40 lbs
– Typical Applications
Component testing, subsystem burn-in, electroplating, anodizing, and R&D environments requiring precise DC voltage and current sourcing with remote programmability.
