The RadiSys EPC-1316/EPC-16 is a 6U VME single-slot embedded controller delivering high-performance computing for industrial and communications applications. Built on an Intel Pentium III 400 MHz processor with 256KB L2 cache and up to 512MB EDO DRAM, it operates as a VMEbus master or slave with full System Controller capabilities. The platform supports A16/A24/A32 addressing and D08/D16/D32 data widths through a Tundra Universe II bridge, handling all 7 VMEbus interrupt levels.
Technical Specifications
Processor & Memory
• Intel Pentium III Mobile 400 MHz
• Intel 440BX chipset
• 256KB on-die synchronous pipeline burst L2 cache
• Up to 512MB EDO DRAM via two 144-pin SODIMM sockets
VMEbus Interface
• Tundra Universe II PCI-VMEbus bridge
• Master or Slave operation
• A16/A24/A32 addressing
• D08/D16/D32 data widths
• All 7 VMEbus interrupt levels supported
• Full VMEbus System Controller features including bus arbiter, bus timeout, IACK daisy chain driver, SYSCLK driver
Graphics & Display
• VGA/SVGA/XGA graphics controller
• 2MB integrated video memory
• Resolution support to 1280×1024
I/O & Connectivity
• 10/100BaseT Fast Ethernet via RJ45 front panel connector
• PS/2 keyboard and mouse ports
• USB port
• Serial port (COM1)
• Primary and secondary EIDE channels
• Floppy drive connector
• Parallel port via onboard connector or P2 connector
• PCI Mezzanine Card (PMC) expansion site
– Key Features
Configurable as single-slot or double-slot with expansion board. Optional Mass Storage and I/O Expansion (MSF) board adds onboard 2.5″ EIDE hard disk, five additional serial ports, Compact Flash support, and 10/100 Ethernet. Compact Flash solid-state disk modules available for mass storage without consuming a second slot.
– Compatibility & Integration
Supports Microsoft DOS, Windows 95, Windows NT 4.0, Windows 2000, and VxWorks 5.3. EPConnect software provides C/C++ programming interface for VMEbus and EPC hardware under Windows NT.
