The Rigol DG1062Z is a dual-channel function and arbitrary waveform generator capable of producing signals up to 60 MHz with 14-bit vertical resolution and a 200 MSa/s sampling rate. Built on SiFi (Signal Fidelity) technology, it generates arbitrary waveforms point-by-point while restoring signals with minimal distortion and achieves jitter as low as 200 ps. The instrument supplies two independent channels with amplitude ranges from 1 mVpp to 20 Vpp (high impedance) and supports 160 built-in standard waveforms plus user-defined arbitrary waveforms using up to 8 Mpts of memory (16 Mpts optional).
Technical Specifications
Signal Generation
• Frequency range: 1 μHz to 60 MHz (sine output)
• Sampling rate: 200 MSa/s
• Vertical resolution: 14 bits
• Arbitrary waveform memory: 8 Mpts standard; 16 Mpts optional
• Amplitude: 1 mVpp to 20 Vpp (high impedance)
• Frequency stability: ±1 ppm
• Phase noise: -125 dBc/Hz
• Jitter: 200 ps minimum
Waveform Capabilities
• Standard waveforms: Sine, Square, Ramp, Pulse, Noise, Arbitrary
• Built-in waveforms: 160 total, including Sinc, Gauss, HaverSine, Lorentz
• Harmonics generator: Up to 8th order with adjustable frequency, amplitude, and phase
• Pulse generation: 1 μHz to 25 MHz with variable pulse width and edge times
• Noise generation: 60 MHz bandwidth
Modulation and Modes
• Modulation types: AM, FM, PM, ASK, FSK, PSK, PWM
• Modulation sources: Internal and external
• Sweep types: Linear, Log, Step with Internal, External, and Manual trigger sources
• Burst mode: Supports Sine, Square, Ramp, Pulse, and Arbitrary waveforms
Integrated Frequency Counter
• Bandwidth: Up to 200 MHz
• Measurements: Frequency, Period, Positive/Negative Pulse Width, Duty Cycle
• Resolution: 7 digits/s
– Key Features
• Two independent output channels with simultaneous arbitrary waveform generation
• Low-jitter clock reference with external 10 MHz In/Out synchronization
• Real-time arbitrary waveform editing interface
• AC power: 100–240 V, 45–440 Hz; maximum 30 W consumption
– Interfaces & Integration
• Output: Two BNC connectors (CH1, CH2)
• USB Host (front panel) for external storage
• USB Device (rear panel) for PC control
• Ethernet port: LXI Core Device 2011 compliant for network remote operation
• External reference clock: 10 MHz In/Out
