The Rigol MC3416 is a 16-channel actuator module that integrates into the Rigol M300 DAQ System mainframe to provide precision control and switching of external devices and test signals. Each of the 16 independent channels features a Single-Pole, Double-Throw (SPDT) switch configurable as Normally-Open (NO) or Normally-Closed (NC), with access to NO, NC, and Common (COM) contacts. The module delivers 200 channels/s switching speed and handles up to 300 Vrms (DC/AC) and 2 Arms (DC/AC) per channel. Isolation within banks reaches -40 dB. The MC3416 occupies one of five available slots in the M300 mainframe and requires the M3TB16 terminal block (sold separately) for external signal connections. The terminal block accommodates 14 AWG to 24 AWG conducting wires with 6.5 mm stripping length and provides 16 labeled channel groups (CH01–CH16), each with NO, NC, and COM terminals secured by binding wires and screws.
Technical Specifications
• Channels: 16 independent SPDT switches
• Switch Configuration: Normally-Open (NO) or Normally-Closed (NC) per channel
• Switching Speed: 200 channels/s
• Maximum Voltage: 300 Vrms (DC/AC)
• Maximum Current: 2 Arms (DC/AC)
• Isolation: -40 dB (within banks)
• Wire Gauge: 14 AWG to 24 AWG
• Strip Length: 6.5 mm
• Dimensions: 17.00 IN (L) × 9.00 IN (W) × 6.00 IN (H)
– Key Features
• 16 independent relay channels for signal routing and device control
• SPDT configuration enables flexible NO/NC switching per channel
• M3TB16 terminal block provides labeled channel access with dedicated NO, NC, and COM terminals
• Modular design fits into M300 DAQ System slots
• Supports wide voltage and current ranges for industrial and laboratory applications
– Typical Applications
• Test signal routing and multiplexing
• External device control and switching
• Automated test sequences requiring relay-based signal paths
• Multi-channel switching in measurement systems
– Compatibility & Integration
The MC3416 is designed exclusively for the Rigol M300 DAQ System mainframe and operates alongside other M300 modules including signal conditioners and multiplexers. The M3TB16 terminal block is the required mating interface for all external signal connections.
