The Rigol MSO8064 is a mixed-signal oscilloscope delivering 600 MHz analog bandwidth across 4 channels with 16 digital channels for comprehensive signal characterization in complex electronic systems. Built on RIGOL’s proprietary ASIC chip and UltraVision II platform, it captures real-time waveforms at up to 10 GSa/s with 500 Mpts memory depth and exceeds 600,000 waveforms per second capture rate. The 10.1-inch capacitive multi-touch display (1024×600 pixels) with 256-level intensity grading and color persistence delivers clear waveform visualization.
Technical Specifications
• Bandwidth: 600 MHz (single-channel and half-channel modes)
• Analog Channels: 4
• Digital Channels: 16
• External Trigger Channel: 1
• Sample Rate (Real-Time): Up to 10 GSa/s
• Memory Depth: Up to 500 Mpts
• Waveform Capture Rate: Over 600,000 waveforms/second
• Hardware Real-Time Recording: Up to 450,000 frames
• Display: 10.1-inch capacitive multi-touch, 1024×600 pixels
• Intensity Grading: 256-level with color persistence
– Key Features
• 41 automatic waveform parameter measurements
• Full-memory hardware measurement function
• Advanced FFT analysis with peak search
• Waveform histogram analysis
• Real-time eye diagram and jitter analysis (optional software)
• Serial bus decoding for up to 4 buses simultaneously: RS232/UART, I2C, SPI, LIN, CAN, FlexRay, I2S, MIL-STD-1553
• Jitter analysis: TIE, cycle-to-cycle, width variations
• Clock recovery: constant clock, first/second-order PLL, explicit clock modes
• Configurable bandwidth limit: 20 MHz, 250 MHz, or disabled
• Built-in power analysis software (optional)
– Integrated Instruments
The MSO8064 combines seven independent tools: digital oscilloscope, 16-channel logic analyzer, spectrum analyzer, arbitrary waveform generator (optional), digital voltmeter, 6-digit frequency counter with totalizer, and protocol analyzer (optional).
– Connectivity
• USB HOST and DEVICE
• LAN (LXI compliant)
• WiFi module (optional)
• HDMI output
• TRIG OUT
• USB-GPIB interface
