The Rohde & Schwarz NRP90TWG is a thermocouple-based thermal power sensor engineered for precision measurements across the 60 GHz to 90 GHz band. It delivers dynamic range from –35 dBm to +20 dBm with measurement noise below 28 nW (typically 20 nW) and linearity of 0.010 dB between 50 GHz and 110 GHz. The sensor handles continuous average power up to 0.3 W and peak envelope power to 10 W for 1 µs bursts, with impedance matching (SWR) under 1.35. Thermal design architecture minimizes environmental sensitivity and measurement drift, while an internal calibration test verifies accuracy against stored reference values. Operation via USB or LAN connectivity accommodates production floors, R&D labs, calibration facilities, and field service environments. The WR12 connector features a screw lock mechanism to prevent cable disconnection. Acquisition occurs at 50 ksps sigma-delta sampling with ±5 ppm time base accuracy. Measurement throughput reaches 500+ samples per second in buffered mode, enabling rapid characterization of any modulation type.
Technical Specifications
• Frequency Range: 60 GHz to 90 GHz
• Power Measurement Range: 300 nW to 100 mW (–35 dBm to +20 dBm)
• Measurement Noise: < 28 nW (typical 20 nW)
• Linearity: 0.010 dB (0.23%) between 50 GHz and 110 GHz
• Maximum Continuous Average Power: 0.3 W (+25 dBm)
• Maximum Peak Envelope Power: 10 W (+40 dBm) for 1 µs duration
• Impedance Matching (SWR): < 1.35
• Acquisition Sample Rate: 50 ksps (sigma-delta)
• Time Base Accuracy: ±5 ppm
• Connector Type: WR12 with screw-lock interface
– Key Features
• Thermocouple sensor technology for stable thermal measurements
• Internal calibration verification against stored reference standards
• Measurement speed: 500+ samples per second in buffered mode
• Modulation-agnostic: tolerates any modulation type
• Dual connectivity: USB and LAN interfaces
• Thermal isolation design minimizes environmental drift
– Typical Applications
• Aerospace and defense system characterization
• Satellite communications power verification
• Radar system performance measurement
• Production and acceptance testing
• Field maintenance and troubleshooting
– Compatibility & Integration
• USB connection via R&S®NRP-ZKU or R&S®NRP-ZKC cables
• LAN integration with R&S NRX base units via R&S®NRP-ZK6
• Weight: 0.44 lbs (product), 0.506 lbs (shipping)
