The Shinko Electric SBX92300864-5 LM-ARM-CONT is a DIN rail-mounted robot controller for precise command and coordination of robotic arm movements in automated manufacturing environments. This flame-resistant resin-encased unit delivers deterministic control in industrial automation settings, equipped with dual green status LEDs, one In/Out switch, and a single Mil-Spec connector for system integration.
Technical Specifications
• Model: SBX92300864-5 LM-ARM-CONT
• Manufacturer: Shinko Electric
• Alternative Models: Sinfonia SBX92300864-5 LM-ARM-CONT, 3D80-000652-V3 LM-ARM-CONT, SCE92300006-3, SBX92302312, SBX92103237, LM-ARM-CONT2, BX80-000140-V1, BX80-000173-V1, SCE92300106
• Construction: Flame-resistant resin enclosure
• Fusing: 3× 125V, 3A fuses; 3× 250V, 10A fuses
• Recommended Protection: Time-lag fuse, 250V AC, 2A
• Power Supply: 24 VDC or 24 V AC/DC (polarity-sensitive for DC)
• Wiring: Copper AWG16–14 (1.31–2.08 mm²) for FG and power terminals
• Terminal Configuration: Left-side wiring with solderless insulated sleeves recommended
• Operating Temperature: −5 to 55°C (when panel-mounted with ambient ≤50°C); −5 to 55°C (face-mounted with ambient ≤55°C)
• Humidity: 35 to 85% RH non-condensing
• Installation: DIN rail mounting with minimum 50 mm clearance above and below for heat dissipation
– Key Features
• Dual green status indicator LEDs for operational visibility
• In/Out logic switch for control sequencing
• Single Mil-Spec connector for robust system interfacing
• External fuse and circuit breaker requirement (not integrated)
• Separation of I/O and power wiring paths to minimize noise coupling
• Polarity-critical 24 VDC supply design
– Environmental Requirements
Operates in low-dust, corrosion-free environments without flammable or explosive atmospheres. Excludes direct sunlight, mechanical vibration, icing conditions, and liquid contact. Incompatible with high-current electromagnetic switches and cable runs.
– Maintenance & Cleaning
Clean with soft dry cloth only. Alcohol-based solvents deface the unit. Power OFF before terminal retightening or maintenance. Periodic maintenance required.
