The SL Power / Condor Power CPCI-354-20010 is a 350 Watt AC power supply engineered for CompactPCI system integration. It delivers regulated power across industrial, communications, and military/aerospace platforms, supporting both standalone operation and parallel configurations for redundancy. The unit meets PICMG power interface specifications and provides high power density in a compact 6U × 8HP form factor with hot-plug capability.
Technical Specifications
• Input: 90–264 Vac continuous, 47–63 Hz
• Rated Power: 350 W
• Cold Start Current: <30 A at 115 Vac; 60 A at 230 Vac (thermistor-limited)
• Power Factor: 0.99 typical at full load
• Efficiency: 70% typical
• Outputs: High-current 5V and 3.3V rails
• Line & Load Regulation: ±2% over input and load range; 0.1% over 8 hours after 30 min warm-up
• Transient Response: <1 ms recovery to 1% for 50% load step; <5% peak overshoot
• Overvoltage Protection: Trip-point ≤136% nominal; input recycle required for reset
• Holdup Time: 16 ms minimum at full load
• Brownout Protection: Maintains regulation to 85 Vac (30 s max)
• Thermal: –40°C to +70°C operating; 30 cfm airflow required
• Dimensions: 160 mm board depth
– Key Features
• 38-pin PICMG 2.11 modular connector
• Current sharing and internal OR-ing diodes for parallel operation
• Overload and short-circuit protection with automatic recovery on all outputs
• FAIL# signal (TTL): asserts low on any output fault, overtemperature, or overvoltage
• DEG# signal (TTL): asserts low 20°C before thermal shutdown
• Amber FAIL LED and green STATUS LED status indication
• Hot-plug input/output connectors for N+1 redundancy and hot-swap
– Compatibility & Integration
Designed for CompactPCI architectures requiring high-reliability power distribution. Supports redundancy through paralleling and internal OR-ing diode topology. Status and fault signals integrate with system management controllers via TTL-compatible logic outputs.
