The Sumitomo TYPE-36 is a compact core alignment fusion splicer engineered for single-pass, field-deployable fiber optic splicing. Weighing 6.9 kg with dimensions of 190(W) × 190(D) × 175(H) mm, this fully automatic splicer delivers splice cycle times of approximately 25 seconds with typical loss of 0.02 dB for single-mode fiber. The splicer employs High-resolution Direct Core Monitoring (HDCM) image processing for precision X and Y plane fiber alignment, paired with a dual microscope observation system offering 280x magnification. A detachable 5.6-inch TFT color monitor provides real-time feedback.
Technical Specifications
• Applicable Fiber Types: Single-mode (SMF), Multimode (MMF), Dispersion Shifted (DSF), Dispersion Compensated (DCF), Cut-off Shifted (CSF), Er-doped
• Cladding Diameter Range: 80 to 150 µm
• Cleaved Length: 9 to 16 mm
• Coated Fiber Diameter: 0.25 to 0.9 mm
• Fiber Chuck Capacity: Up to 900 µm
• Splice Loss (Identical Fibers): SMF 0.02 dB, MMF 0.01 dB, DSF 0.05 dB
• Splice Cycle Time: Approximately 25 seconds
• Data Memory: 1,000 splices standard; up to 16,000 with optional card
• Programmable Splice Programs: Up to 35
• Programmable Heating Programs: Up to 4
• Splice Screening Tension: 1.96 N (200 gf)
• Power Supply: 100–240 VAC, 50/60 Hz or 12 VDC
• Operating Temperature: −10°C to +50°C
• Operating Humidity: 95% RH (non-condensing)
– Key Features
• Automatic arc test compensates for environmental conditions and fiber manufacturer variations
• Built-in heater supports 40 mm and 60 mm sleeve thermal protection
• Splicer Remote Interactive Maintenance (S-RIM) enables software upgrades and diagnostics via high-speed modem
• Mirror-free dual microscope design streamlines maintenance and accelerates inspection cycles
• Loss estimation with automatic splicing function
– Typical Applications
Field installation and factory splicing in both terrestrial and submarine cable environments where compact footprint and rapid cycle times justify deployment.
– Compatibility & Integration
Accepts all standard single-mode and multimode fiber types from 80 to 150 µm cladding diameter. Heater accommodates industry-standard 40 mm and 60 mm protection sleeves.
