The Tektronix DPO3012 is a 100 MHz, 2-channel digital phosphor oscilloscope built for signal acquisition and analysis in development and troubleshooting environments. It captures waveforms at rates exceeding 50,000 waveforms per second, enabling reliable detection of infrequent transient events, glitches, and anomalies. With 2.5 GS/s sampling across both channels and 5 Megapoint record length, the instrument provides high time-domain resolution over extended capture windows. The TekVPI® probe interface auto-configures active, differential, and current probes with instantaneous scaling and unit assignment.
Technical Specifications
• Bandwidth: 100 MHz
• Channels: 2 analog
• Sample Rate: 2.5 GS/s (all channels)
• Record Length: 5 Megapoint (all channels)
• Waveform Capture Rate: >50,000 wfm/s
• Rise Time (typical): 3.5 ns at 100 MHz bandwidth with 1 MΩ termination
• Maximum Input Voltage: 300 VRMS (1 MΩ input, Category II)
• Input Coupling: DC, AC, GND
• Input Termination: 1 MΩ, 50 Ω, or 75 Ω (selectable)
• Lower Frequency Limit (AC coupled): <10 Hz
• Display: 9 in. WVGA widescreen color
• Depth: 5.8 in. (147 mm)
• Weight: 9 lb. (4 kg)
– Key Features
• Wave Inspector® controls for rapid waveform navigation and automated event search
• 29 automated measurements and FFT analysis
• Advanced trigger suite: runt, logic, pulse width/glitch, setup/hold violation, serial packet, and parallel data
• Optional serial triggering and analysis modules for I2C, SPI, CAN, LIN, RS-232/422/485/UART, and I2S/LJ/RJ/TDM protocols
• Probe compensator output: 2.5 V amplitude at 1 kHz
– Connectivity & Integration
• Dual USB 2.0 host ports (front and rear) for storage, printing, and keyboard
• USB 2.0 device port (rear) for USBTMC and PictBridge®-compatible printer support
• 10/100 Ethernet port
• Video output for external monitor or projector display
• Trigger out connector (BNC, positive polarity pulse)
• Front-panel auxiliary BNC input (1 MΩ impedance)
• Optional modules: DPO3COMP (serial bus analysis), DPO3PWR (power analysis)
