The Tektronix MSO3032 Mixed Signal Oscilloscope combines analog and digital acquisition for simultaneous analysis of embedded systems, serial interfaces, and mixed-signal designs. With 2 analog channels and 16 digital channels, it captures up to 20 correlated signals in a single view. The instrument delivers 300 MHz bandwidth, 2.5 GS/s sample rate across all channels, and 5 Megapoints record length, enabling rapid debugging and characterization of complex electronic designs.
Technical Specifications
Analog Channels
• 2 channels with AC, DC, or GND coupling
• Input impedance: 1 MΩ ±1%, 75 Ω ±1%, or 50 Ω ±1%
• Sensitivity: 1 mV/div to 10 V/div (1 MΩ); 1 mV/div to 1 V/div (75 Ω, 50 Ω)
• Offset: ±1 V to ±100 V depending on range
• Maximum input: 300 VRMS CAT II with peaks ≤±450 V
• Vertical resolution: 8 bits standard; 11 bits in high-resolution mode
Digital Channels
• 16 channels (D15–D0) with 101 kΩ input impedance
• Configurable thresholds per 8-channel group: TTL, CMOS, ECL, PECL, or user-defined (−15 V to +25 V)
• Maximum input voltage: −20 V to +30 V
• Threshold accuracy: ±(100 mV +3% of setting)
• Minimum voltage swing: 500 mVpk-pk
• High-speed acquisition resolution: 121.2 ps (MagniVu™)
Acquisition
• Bandwidth: 300 MHz
• Sample rate: 2.5 GS/s (all channels)
• Record length: 5 Megapoints (all channels)
• Waveform capture rate: >50,000 wfm/s
– Key Features
• Advanced trigger suite: pulse width, timeout (4 ns to 8 s), pattern, and line-R triggering
• Serial protocol support: optional I2C, SPI, CAN, LIN, RS-232/422/485/UART, I2S/LJ/RJ/TDM triggering and analysis
• Parallel bus triggering and decode (1 to 16 bits) with multichannel setup/hold detection
• 29 automated measurements, FFT analysis, and mask measurement
• Wave Inspector® controls for rapid waveform navigation and automated search
• Math functions for signal processing
• Optional power analysis (power quality, switching loss)
– Typical Applications
Embedded system debugging, serial interface characterization, mixed-signal design validation, protocol analysis, and power measurement.
– Compatibility & Integration
Supports standard probe connections and TTL/CMOS/ECL/PECL logic family thresholds. Optional modules enable advanced serial and power analysis capabilities.
