The Tektronix PA1000 Single-Phase Power Analyzer delivers high-precision measurements across voltage, current, power, and harmonic domains for single-phase product testing. It meets international standards for power consumption compliance, including Energy Star™ and IEC 62301 standby power testing. The instrument captures transient behavior at 1 MS/s while detecting standby power levels as low as 5 mW, making it suitable for power supplies, LED lighting, consumer electronics, and household appliances.
Technical Specifications
Measurement Parameters:
• Voltage: Vrms, VDC, Vpeak+, Vpeak-, VTHD, VDF, and harmonic content
• Current: Arms, ADC, Apeak+, Apeak-, ATHD, ADF, and harmonic content
• Power: True Power (W), Apparent Power (VA), Reactive Power (VAR)
• Energy: Wh, VAh, VARh, Ah
• Frequency, Power Factor, Impedance (Z), Resistance (R), Reactance (X), Crest Factor (VCF, ACF)
• Harmonic analysis to the 50th order with IEC/EN 61000-3-2 and 4-7 pre-compliance testing
Electrical Performance:
• Voltage ranges: 10 Vpeak to 1000 Vpeak (up to 600 Vrms CAT II)
• Current ranges: 20 µA to 100 Apeak (20 A shunt); 0.002 Apeak to 2.0 Apeak (1 A shunt); direct input 20 µA to 20 Arms
• Low-current accuracy to 40 µA RMS
• Bandwidth: 1 MHz
• Sample rate: 1 MS/s
• Voltage/Current accuracy: ±0.04% of Reading ±0.04% of Range (45 Hz–850 Hz)
• Watts accuracy: ±0.075% of Reading ±0.075% of Range (PF=1, 45–850 Hz)
• Frequency range: 10 Hz to 20 kHz
– Key Features
• Dual current shunt options (20 A and 1 A) for flexible range selection
• Continuous transient sampling at 1 MS/s resolves rapid load changes
• Standby power detection down to 5 mW with full IEC 62301 and EN 50564 compliance
• Extended frequency coverage to 1 MHz for non-linear load analysis
• CAT II safety rating for 600 Vrms measurements
– Typical Applications
• Power supply efficiency and regulation testing
• LED driver and luminaire characterization
• Consumer electronics standby and active mode analysis
• Household appliance energy consumption validation
• Harmonics pre-compliance testing per IEC/EN standards
– Compatibility & Integration
Measurement Category: CAT II (voltage input)
