The Wavetek 180 is a versatile sweep/function generator that produces sine, square, triangle, TTL pulse, ramp, and DC waveforms across a broad frequency range. It supports both manual and voltage-controlled frequency adjustment with an internal sweep generator for frequency response analysis and system characterization. The instrument delivers variable amplitude outputs through dual BNC connectors with selectable DC offset capability, making it suitable for testing and calibrating analog and digital circuits across laboratory and industrial environments.
Technical Specifications
Frequency Range
• Model 180: 0.1 Hz to 2 MHz in seven overlapping decade ranges
• Model 180LF (Low Frequency option): 0.01 Hz to 200 kHz
• 1000:1 frequency span per range
Waveform Outputs
• Sine, square, triangle, TTL pulse (50% duty cycle), ramp, and DC
• TTL pulse drives up to 20 TTL loads
• High (HI) output: 20V peak-to-peak maximum (open circuit); 10V peak-to-peak into 50Ω load
• Low (LO) output: 1V peak-to-peak into 50Ω load
• Both outputs feature 30 dB attenuation and 50Ω output impedance
DC Offset
• HI output: ±10V maximum (open circuit), ±5V into 50Ω load
• LO output: ±1V maximum into 50Ω load
• Calibrated zero DC offset position included
• Offset attenuated proportionally by amplitude control
Sweep Generator
• Internal ramp generator with up to 1000:1 sweep width ratio
• Sweep time: 30 ms to 20 seconds nominal
• Recurring low-to-high frequency oscillation with selectable range and rate
Voltage Controlled Generator (VCG)
• Frequency control: Up to 1000:1 on all ranges except ×1 Hz and ×10 Hz
• External control signal: 0 to ±2V input
• Input impedance: 2 kΩ
• VCG slew rate: 0.1 V/µs
Generator Control Voltage (GCV) Output
• 0 to +2V nominal (open circuit) proportional to generator frequency
• Output impedance: 600Ω
Amplitude Stability
• Sine variation: Less than ±0.1 dB on ranges up to ×100K; less than ±0.5 dB on ×1M range
• Sine distortion (continuous mode): Less than 0.5% on ×100, ×1K, ×10K ranges (typically 0.2%)
– Key Features
• Seven overlapping decade ranges eliminate frequent switching
• Dual output levels (HI and LO) accommodate low and high impedance loads
• VCG input enables DC programming and FM modulation
• GCV output provides horizontal sweep signal for oscilloscope integration
• Low frequency model extends operation to 0.01 Hz
– Typical Applications
• Circuit frequency response measurement and characterization
• Oscilloscope and instrumentation calibration
• Audio and ultrasonic system testing
• TTL logic and digital system stimulus
• Transducer and sensor evaluation
