The Yamato DKN600 is a programmable mechanical convection oven for industrial and laboratory applications requiring precise temperature control and uniform heating. This 150-liter unit delivers ±1.0°C control accuracy at 210°C with ±2.5°C temperature distribution uniformity. The HiTEC IV FR Type 2 microprocessor PID controller supports up to 15 segments across 30 steps per program, with auto start/stop, ramp, and soak modes. Reaches 260°C in approximately 60 minutes. Type 304 stainless steel chamber with perforated shelving accommodates two shelf sets. Integrating timer extends to 49,999 hours. Optional cable port supports data acquisition.
Technical Specifications
• Capacity: 150 liters (5.3–5.4 cu. ft.)
• Internal Dimensions: 600 mm W × 500 mm D × 500 mm H (23.50 in × 19.50 in × 19.50 in)
• External Dimensions: 710 mm W × 651 mm D × 870 mm H (27.95 in × 25.63 in × 34.25 in)
• Temperature Range: Ambient +5°C to 260°C
• Control Accuracy: ±1.0°C at 210°C
• Temperature Distribution: ±2.5°C at 210°C
• Preheat Time to 260°C: Approximately 60 minutes
• Chamber Construction: Type 304 (18-8) stainless steel
• Exterior: Cold rolled carbon steel with baked melamine finish
• Heater: Iron-chrome wire with TRIAC zero cross control
• Power: 115 VAC, 13 A, single phase, 50/60 Hz
• Controller: HiTEC IV FR Type 2 microprocessor PID
• Program Capacity: 30-step, 3-pattern with repeat functions
• Timer Range: 1 minute to 999 hours (resolution 1 minute or 1 hour)
• Temperature Presets: Save/load 10 temperatures
• Integrating Time: Up to 49,999 hours
• Exhaust Ports: Three ports—one 30 mm diameter on top, two 30 mm diameter on rear face
• Optional Cable Port: 1-inch diameter for data acquisition (25/50 mm alternatives available)
• Shelving: Perforated stainless steel; 4 brackets for 2 shelf sets
• Protection: Electrical leakage breaker with over current protection
– Key Features
• Microprocessor-controlled temperature stability for consistent batch processing
• Ramp and soak programming for complex thermal profiles
• Dual exhaust configuration enables flexible ducting and chamber pressure management
• Integrating time function tracks cumulative operating duration for maintenance scheduling
– Typical Applications
• Material testing and material aging studies
• Thermal treatment and annealing processes
• Component curing and polymer processing
• Sterilization and drying protocols in regulated environments
– Compatibility & Integration
Optional cable port supports external data acquisition systems. Standard shelf configuration accommodates standard laboratory trays and fixtures.
