The Agilent/Keysight 59501B is an isolated digital-to-analog converter and power supply programmer that bridges HP-IB control systems to analog-capable power supplies lacking native bus interface. It enables remote, digitally controlled voltage and current programming of compatible instruments and functions as a standalone low-level DC signal source.
Technical Specifications
Output Voltage Ranges
• Unipolar High: 0 to 9.99 V (10 mV resolution)
• Unipolar Low: 0 to 9.999 V (1 mV resolution)
• Bipolar High: -10 to +9.98 V (20 mV resolution)
• Bipolar Low: -1 to +0.998 V (2 mV resolution)
DC Output Current: 10 mA maximum
Accuracy (at 23°C ±5°C)
• Unipolar High: 0.04% + 0.5 mV
• Unipolar Low: 0.04% + 1 mV
• Bipolar High: 0.04% + 1 mV
• Bipolar Low: 0.04% + 2 mV
Temperature Stability
• Unipolar High: 0.01%/°C + 0.5 mV/°C
• Unipolar Low: 0.14%/°C + 0.1 mV/°C
• Bipolar High: 0.013%/°C + 0.5 mV/°C
• Bipolar Low: 0.01%/°C + 0.1 mV/°C
Performance Parameters
• D/A Conversion Time: 250 µs
• Output Ripple/Noise: 2 mV rms / 10 mV p-p
• Zero Adjust Range: ±250 mV
• Full Scale Adjust: ±5%
• Isolation: 600 Vdc (HP-IB to output)
• Input Power: 10 VA, 48-63 Hz (100/120/220/240 Vac selectable, -13% to +6%)
– Key Features
• Selectable unipolar and bipolar output modes via rear-panel switch
• HP-IB command interface for system integration
• Isolated analog output for safe power supply programming
• Precision zero and full-scale calibration adjustments
• Low output impedance supports 10 mA sourcing capability
– Typical Applications
Remote voltage and current programming of analog-controlled power supplies in automated test systems. Low-level precision DC signal generation for instrumentation control.
– Compatibility & Integration
Designed for HP power supplies with analog control inputs but no built-in HP-IB interface. Supports current limit programming when paired with supplies using internal HP-IB options for voltage control.
