The Keysight DSOS054A is a high-definition oscilloscope delivering 500 MHz bandwidth across 4 analog channels with superior signal fidelity for advanced electronic testing. The instrument combines a 10-bit ADC with a low-noise front-end architecture to achieve 8.1 bits average ENOB at full bandwidth, supported by 100 fs rms intrinsic jitter and 90 µV noise at 1 mV/div. Vertical resolution extends to 16 bits in high-resolution mode—four times the resolution of traditional 8-bit designs. The 20 GSa/s maximum sample rate (10 GSa/s in 4-channel mode) and up to 800 Mpts memory depth enable deep signal capture and detailed waveform analysis. A 15-inch XGA capacitive touch display with multi-touch gesture support, Intel i5 quad-core processor, and 8 GB RAM create an integrated analysis platform. Dual video outputs, six USB ports (including 2 USB 3.0), gigabit Ethernet, and auxiliary trigger/reference outputs support flexible integration into production and development environments.
Technical Specifications
• Bandwidth: 500 MHz (analog channels); upgradeable to 8 GHz
• Analog Channels: 4
• Sample Rate: 20 GSa/s (2-channel mode); 10 GSa/s (4-channel mode)
• Memory Depth: 100 Mpts/channel standard; upgradeable to 400 Mpts/channel
• Vertical Resolution: 10-bit standard; up to 16 bits (high-resolution mode)
• Effective Number of Bits (ENOB): 8.1 bits average at full bandwidth
• Intrinsic Jitter: 100 fs rms (scaling 100 ns/div, measurement time <1 µs)
• Input Noise: 90 µV at 1 mV/div and 1 GHz bandwidth
• Input Impedance: 50 Ω ± 2.5% / 1 MΩ ± 1% (11 pF typical)
• Display: 15-inch XGA capacitive touch screen (1024 × 768 pixels)
• Processor: Intel i5 quad-core at 3 GHz
• Memory: 8 GB RAM; 256 GB removable SSD
• Operating System: Windows 10
– Key Features
• High-resolution mode delivers four times the vertical resolution of 8-bit oscilloscopes
• Low intrinsic jitter and noise for precise time-domain and amplitude measurements
• Multi-touch display supports intuitive zoom and pan operations
• 10/100/1000Base-T Ethernet with up to 80 MB/s data offload; USB 3.0 device port supports 200 MB/s offload
• Dual video output capability (DisplayPort and VGA) for extended monitoring
• 10 MHz timebase reference input/output for synchronization with external systems
• Trigger output and auxiliary front/rear BNC outputs for system integration
– Typical Applications
• Digital circuit validation and debugging
• High-speed signal integrity characterization
• Power supply ripple and noise analysis
• Serial protocol decoding and validation
• Time-domain reflectometry measurements
– Compatibility & Integration
Connectivity includes 6 USB ports, gigabit Ethernet, external trigger and reference inputs, and multi-display support via DisplayPort and VGA. Audio I/O (microphone, line in/out) enable automated test and remote monitoring configurations.
