The Keysight DSOV084A Infiniium V-Series Oscilloscope is an 8 GHz benchtop instrument built for signal integrity measurements and high-speed digital design validation. Four analog channels, 16 digital channels, and configurable sample rates up to 80 GSa/s deliver the bandwidth and timing resolution required for complex waveform capture and protocol-level debugging. With 2 Gpts maximum memory per channel, low noise at 1.04 mVrms (50 mV/div), and a 100 fs jitter measurement floor, this oscilloscope provides the fidelity and dynamic range needed for technology characterization.
Technical Specifications
• Bandwidth: 8 GHz (upgradable)
• Analog Channels: 4
• Digital Channels: 16
• Maximum Sample Rate: 80 GSa/s (2 channels), 40 GSa/s (4 channels)
• Digital Channel Sample Rate: 10 GS/s (16 channels), 20 GS/s (8 channels)
• Maximum Memory Depth: 2 Gpts per channel
• ADC Resolution: 8 bits
• ENOB: > 5.5
• SFDR: > 50 dBC
• Low Noise: 1.04 mVrms at 50 mV/div
• Jitter Measurement Floor: 100 fs
• Display: 12.1″ XGA (1024 × 768) capacitive touch screen with 256-level persistence (intensity-graded or color-graded)
– Key Features
• Hardware serial trigger up to 12.5 Gb/s with 160-bit pattern support
• Protocol triggering and decoding across DDR4, LPDDR4, and additional serial standards
• High-speed hardware serial trigger for logic error debugging
• Windows-based operating system
– Typical Applications
• Signal integrity analysis for high-speed digital designs
• DDR memory characterization and validation
• Serial protocol debugging and compliance verification
• Jitter and timing measurement in systems
– Compatibility & Integration
• Remote control via Ethernet, GPIB, and USB
• LXI Class C compliant with web interface support
• MATLAB enabled for automated measurement and analysis
• Front and rear USB host ports
• Managed calibration through PathWave Calibration Advisor software
