The Keysight DSOX3012A is a 100 MHz digital storage oscilloscope built on the InfiniiVision 3000 X-Series platform. It combines two analog channels with acquisition speeds up to 4 GSa/s and waveform capture rates reaching 1,000,000 waveforms/s via MegaZoom IV technology. The 8.5-inch WVGA color touchscreen display and 8-bit vertical resolution support detailed signal analysis across diverse measurement scenarios.
Technical Specifications
• Bandwidth: 100 MHz
• Analog Channels: 2
• Sampling Rate: Up to 4 GSa/s
• Memory Depth: 2 Mpts standard; 4 Mpts optional
• Waveform Update Rate: 1,000,000 waveforms/s
• Vertical Resolution: 8-bit ADC
• Input Impedance: 1 MΩ || ~15 pF
• Maximum Input Voltage: 300 Vrms CAT II (with N2862B probe)
• Input Coupling: AC, DC, GND
• Display: 8.5-inch WVGA color touchscreen
– Key Features
• Configurable probe attenuation factors: 1x, 10x, 100x, 1000x
• 10 parametric triggers supporting edge, pulse width, pattern, OR, rise/fall time, Nth edge burst, runt, setup & hold, video, and USB modes
• 35 standard automated measurements (expandable to 50 with specific probes)
• Waveform math: Add, subtract, multiply, FFT, differentiation, integration, square root
• Segmented memory for multi-trigger capture
• 5-digit hardware frequency counter
• Optional 3-digit integrated voltmeter
• Optional 20 MHz function/arbitrary waveform generator with modulation
• Hardware-based serial protocol analysis: CAN, LIN, I²C, SPI, RS232
• Upgradeable to MSO configuration with 16 digital channels
– Interfaces & Connectivity
• USB host and device ports
• Optional LAN interface
• Optional VGA interface
• Optional GPIB interface module
– Compatibility & Integration
Standard probe: N2862B Passive probe, 150 MHz, 10:1 attenuation per channel. Optional probes include active differential and current variants. BenchVue software included for instrument control and test automation. Physical footprint: approximately 16 × 14 × 10 inches; 25 lbs.
