The Keysight E4419A is a dual-channel power meter engineered for accurate average power measurements across RF and microwave frequencies. It delivers simultaneous power readings from two independent sensors, enabling efficient comparative analysis and differential measurements on the benchtop or within automated test equipment systems. The meter accepts Keysight 8480 series and E-series power sensors, providing measurement capability from 100 kHz to 110 GHz with dynamic range up to 90 dB.
Technical Specifications
Measurement Performance
• Frequency range: 100 kHz to 110 GHz (sensor dependent)
• Power range: −70 dBm to +44 dBm (100 pW to 25 W, sensor dependent)
• Dynamic range: Up to 90 dB with E-series sensors; 50 dB with 8480 series sensors
• Measurement speed: Up to 100 readings per second over GPIB with E-series sensors; 2× improvement with 8480 series versus 437B
• Absolute accuracy: ±0.02 dB (logarithmic) or ±0.5% (linear mode) after 30-minute warm-up
Measurement Functions
• Absolute power (Watts or dBm) and relative power (Percent or dB)
• Dual-channel simultaneous readings with difference (A−B, B−A) and ratio (A/B, B/A) functions
• Duty cycle measurement: 0.001% to 99.999%
• Selectable averaging: 1 to 1024 readings with auto-averaging
• Limit setting: −150.000 dBm to +230.000 dBm in 0.001 dBm increments
Display & Control
• High-resolution backlit LCD with wide viewing angle
• Single and split-screen display formats
• Analog peaking meter for precise adjustments
• Storage for up to 10 instrument states
• GPIB interface for remote control
– Key Features
• Sensor calibration tables for 8480 series power sensors
• 1.00 mW (0.0 dBm) internal reference with 1.06 maximum SWR
• Input power: 85 to 264 VAC (auto-selected)
• Ground connector accepts 4 mm plugs or bare-wire connections
– Typical Applications
Comparative power analysis, differential measurements, duty cycle characterization, and sensor-to-sensor validation across microwave and RF test scenarios.
– Compatibility & Integration
Full compatibility with Keysight 8480 series and E-series power sensors supports integration into existing test infrastructures.
