The Agilent N2263A 32-Bit Digital Input/Output Module delivers 32 bidirectional I/O lines plus three dedicated handshake control lines for automated test systems. This plug-in module configures as a single 32-bit port, four independent 8-bit ports, or two independent 16-bit ports—all addressable on a byte-by-byte basis. Each I/O channel incorporates Zener diode input protection rated to 42 VDC and on-channel ESD protection, enabling direct interfacing with high-voltage/high-current devices including relays, microwave switches, and solenoid coils.
Technical Specifications
I/O Lines (32 total)
• TTL-compatible input/output or TTL input with open-collector output to 42 VDC
• Maximum sink current: 0.6 A per line
• Output high: ≥2.4 V @ ≤10 mA; Output low: ≤0.8 V @ ≤600 mA
• Input high: ≥2.0 V; Input low: ≤0.8 V
• Zener protection: Input overvoltage (>42 VDC) and ESD per channel
Handshake Control Lines (3 total: PCTL, I/O, PFLG)
• Maximum voltage: +5 VDC line-to-chassis
• Output high: ≥2.4 V @ ≤400 µA; Output low: ≤0.5 V @ ≤1 mA
• Short-circuit current (low): <25 mA to +5 V
• Input high: ≥2.0 V; Input low: ≤0.8 V
• Five configurable handshake modes for peripheral communication
Logic Configuration
• I/O and handshake lines: Positive or negative logic mode selectable
– Key Features
• Byte-addressable I/O with flexible port grouping
• Independent control of I/O polarity and handshake logic modes
• 0.6 A sink capability per line for relay and solenoid switching
• Integral overvoltage and ESD protection on all I/O channels
– Typical Applications
Relay switching and control, microwave attenuator and switch command, solenoid actuation, general-purpose digital control in automated test environments.
– Compatibility & Integration
Plug-in module for Agilent/Keysight 3499A, 3499B, and 3499C Switch/Control Mainframes. Optional screw terminal block (N2293A), Twin-D50 cable (N2297A), or Quad-D25 cable (N2299A) accessories available for signal routing.
