The Boonton 1130 is a programmable distortion analyzer designed for precise audio signal analysis. It is equipped to measure distortion, frequency response, AC and DC voltage, and SINAD (Signal to Noise and Distortion Ratio). The instrument features a built-in low-distortion audio source, making it suitable for stimulus-response applications. Its microprocessor control enables swept measurements, and it offers true RMS average or quasi-peak detection for accurate analysis of complex waveforms and noise.
### Technical Specifications
**Distortion Measurement:**
* **Fundamental Frequency Range:** 10 Hz to 100 kHz (usable to 140 kHz)
* **Resolution:**
* 0.00001% for < 0.11000% THD
* 0.0001% for < 1.1% THD
* 0.001% for < 11% THD
* 0.01% for < 100% THD
* **Display Range:** 0.00001% to 100.0% (-140.00 to 0.00 dB)
* **Accuracy:**
* ± 1 dB (20 Hz to 20 kHz)
* ± 2 dB (10 Hz to 100 kHz)
* **Input Voltage Range:** 50 mV to 300 V
* **Range:** (higher of) 0.01% (-80 dB) or 10 µV (10 Hz to 20 kHz, 80 kHz BW)**SINAD Measurement:**
* **Range:**
* 80 dB or 10 µV (10 Hz to 20 kHz, 80 kHz BW)
* 74 dB or 20 µV (10 Hz to 50 kHz, 220 kHz BW)
* 70 dB or 40 µV (10 Hz to 50 kHz, 500 kHz BW)
* 65 dB or 50 µV (50 kHz to 100 kHz, 500 kHz BW)
* **Residual Noise:**
* 85 dB or 10 µV (80 kHz BW)
* 85 dB or 20 µV (220 kHz BW)
* 85 dB or 40 µV (500 kHz BW)**Frequency Measurement:**
* **Range:** 5 Hz to 200 kHz
* **Resolution:**
* 0.001 Hz (5.000 Hz to 199.999 Hz)
* 0.01 Hz (200.00 Hz to 1999.99 Hz)
* 0.1 Hz (2.0000 kHz to 19.9999 kHz)
* 1.0 Hz (20.000 kHz to 199.999 kHz)
* **Accuracy:** Timebase accuracy + 1 count
* **Sensitivity:** 5.0 mV (Frequency mode), 50.0 mV (Distortion and SINAD modes)**Timebase:**
* **Type:** 10 MHz TCXO
* **Accuracy:** ± 1 ppm/yr**AC Level Measurement:**
* **Ranges (Full Scale):** 300.0 V, 30.00 V, 3.000 V, 300.0 mV, 30.00 mV, 3.000 mV, and 0.300 mV
* **Overrange:** 33% (except on 300 V range)
* **Accuracy:**
* ± 1% (50 Hz to 50 kHz, 1 mV to 300 V, 0.5% typ.)
* ± 2% (20 Hz to 100 kHz, 1 mV to 300 V, 1.0% typ.)
* ± 3% (10 Hz to 100 kHz, 1 mV to 300 V, 1.5% typ.)**DC Level Measurement:**
* **Ranges (Full Scale):** 300.0 V, 30.00 V, and 3.000 V
* **Overrange:** 33% (except on 300 V range)
* **Accuracy:** ±1.0% or 6 mV, whichever is greater**Internal Audio Source (Distortion Analyzer):**
* **Frequency Range:** 10 Hz to 140 kHz**General Specifications:**
* **Power Requirements:** 100, 120, 220 and 240 V ± 10%, 50 to 400 Hz (Note: This is listed for a Boonton 4200 power meter, but indicates typical Boonton power input parameters)
* **Dimensions:** 14.9 cm (height) x 21.1 cm (width) x 34.9 cm (depth) (Note: This is listed for a Boonton 4200 power meter, but indicates typical Boonton instrument dimensions)
* **Weight:** 4.54 kg (Note: This is listed for a Boonton 4200 power meter, but indicates typical Boonton instrument weight)### Interfaces* **Remote Operation:** Supports remote operation via bus commands### Physical* **Dimensions:** 5.85 in (14.9 cm) high x 8.3 in (21.1 cm) wide and 13.75 in (34.9 cm) deep (Note: This specification is from a Boonton 4200 but likely representative of the 1130 form factor)
* **Weight:** 10 lbs (4.54 kg) (Note: This specification is from a Boonton 4200 but likely representative of the 1130 form factor)### Compatibility* **Sensors:** While the Boonton 1130 is primarily an audio distortion analyzer, Boonton also manufactures a range of RF power sensors (e.g., 4200 series, RTP5000 series) and RF voltmeters that are compatible with their power meters and other RF test equipment. These are not directly compatible with the 1130 but highlight Boonton's broader product ecosystem.
* **Software:** Boonton offers Power Analyzer Software for managing measurements with their power meters.Why Choose Aumictech for Boonton 1130?
At Aumictech, we specialize in supplying high-performance audio test and measurement equipment. Whether you need precise distortion analysis, accurate frequency response testing, or reliable voltage measurements, our team ensures the Boonton 1130 delivers maximum performance for your audio engineering and laboratory applications.
