The Chloride / OneAC HoldUp HU200 is a ride-through power source designed to offer uninterrupted power to critical equipment during brief power interruptions or voltage fluctuations. This device leverages stored energy to bridge gaps in power delivery, thereby preventing data loss and minimizing equipment downtime, making it suitable for sensitive electronic devices and industrial control systems.
### Technical Specifications
**Power Conditioning:**
* **Technology:** Proprietary low-impedance technology.
* **Surge Voltage Withstand Capability:** ANSI/IEEE C62.41 Category A & B, 6 kV/200 & 500 Amp, 100 kHz ringwave.
* **Surge Voltage Let-Through (Max):** Less than 10 V Normal mode (L-N), less than 0.5 V Common mode (N-G) when subjected to 6 kV ANSI/IEEE.
* **Full Output Isolation:** Achieved through proprietary transformer design integrating power conditioning and voltage conversion magnetics.
* **Virtual Kelvin Ground®:** A patented grounding methodology that establishes a noise-free power environment.
**Electrical Characteristics:**
* **Input Voltage:** 120 V (USA specified).
* **Input Frequency:** 60 Hz (USA specified).
* **Output Voltage:** 120 V (USA specified).
* **Output Receptacles:** “T-slot” output connector accepts either 5-15P or 5-20P plugs. Additional receptacle options may be available.
* **ONBoost Functionality:** Boosts output voltage 11% above input voltage if input is between -21% and -15% of nominal.
**Performance:**
* **Transfer Time (Typical/Max):** < 3.0 / 3.5 milliseconds.
* **On-Battery Output Voltage:** Sine wave.
* **Load Power Factor Range (Crest Factor):** UPS .65 to 1.0 (3). Supports loads rated 0.5 to 1.0 (<5).
* **Typical Runtime at Full Load:** Approximately 14 minutes (for a 60 Hz unit). *Note: Actual runtime may vary based on application-specific conditions and system load.***Interfaces:**
* **Communications:** Intelligent serial communications for advanced diagnostics and remote management. Includes MopUPS software and cable for network shutdown and remote management. Optional USB and SNMP available.**Physical Characteristics:**
* **Dimensions (H x W x D):** 3.5 in x 17.25 in x 19.5 in (9 cm x 44 cm x 50 cm).
* **Design:** Compact, slim-line design to conserve space. Can be rackmountable (with a 23” rackmount option available).
* **Battery Replacement:** Patented battery pack allows for replacement in under a minute, without tools, training, or downtime. On-site, on-line replaceable battery.**Compatibility:**
* **Voltage and Frequency:** Designed for 120V, 60Hz North American power systems.
* **Plug Compatibility:** "T-slot" output connector accepts standard NEMA 5-15P and 5-20P plugs.
* **Software:** Compatible with MopUPS software for network shutdown and remote management.**Environmental and Safety:**
* **Operating Temperature:** Batteries should not be kept in storage for periods exceeding 6 months at 25°C without being recharged; recharge at least once every 4 months.
* **Battery Disposal:** Batteries must be disposed of in accordance with regulations for toxic and harmful waste.
* **Safety:** Contains capacitors that represent a severe shock hazard, even when unplugged. No user-serviceable parts inside; servicing by qualified personnel only. Risk of electrical shock from batteries and high short-circuit intensity.Why Choose Aumictech for Chloride / OneAC HoldUp HU200?
At Aumictech, we specialize in supplying high-end power protection equipment. Whether you need seamless ride-through power for critical industrial control systems, reliable protection for sensitive electronic devices, or robust solutions to prevent equipment downtime, our team ensures the Chloride / OneAC HoldUp HU200 delivers maximum performance for your application.
