The Dranetz PP1/P is a versatile, portable power quality analyzer designed for comprehensive monitoring and analysis of electrical systems. Its modular TASKCard® architecture allows users to customize its functionality for specific applications, such as power quality, harmonics, energy, inrush current, and flicker analysis. This adaptability makes it suitable for a wide range of technical users, including engineers, system integrators, and laboratory personnel in the USA.
### Technical Specifications
**General:**
* **Manufacturer:** Dranetz BMI
* **Model:** PP1 / PP1/P
* **Instrument Type:** Portable Power Quality Analyzer
* **Architecture:** TASKCard®-driven with modular functionality
* **Display:** Large, easy-to-read LCD with electroluminescent backlighting
* **Setup:** Easy Start™ for automated configuration
* **Operation Modes:** Scope Mode®, Meter Mode, Data Recorder, Time Plots
* **Power Source:** 90-130 VAC or 180-250 VAC, 47-450 Hz, 100W max; 12 VDC 10A external input
* **Internal UPS:** Two-hour battery backup
* **Warm-up Period:** 15 minutes for optimal performance
**Measurement Capabilities (TASKCard Dependent):**
* **Power Quality:** Cycle-by-cycle monitoring of sags, swells, transients (voltage and current) per IEEE 1159. Classifies power quality disturbances to IEEE 1159 standard.
* **Harmonics:** Simultaneous monitoring of harmonics.
* **Energy:** Demand, energy, and harmonics analysis. Programmable demand and energy rate schedules for revenue calculations.
* **Inrush Current:** Records voltage and current inrush events cycle by cycle. Ideal for analyzing motor start-ups, transformer magnetization, and breaker operations.
* **Flicker:** Continuous monitoring of single or three-phase flicker parameters per IEC 868 and IEC 1000-4-15. Displays probability graphs, min/max reports, and subharmonics spectrum.
* **Parameters Measured (with TASKCard 8000):** V, I, W, VA, VAR, PF, Demand & Energy.
* **Waveform Capture:** Available with TASKCard PQPlus.
**Electrical:**
* **Input Channels:** 8 channels total: 4 fully differential voltage channels and 4 current channels.
* **Voltage Measurements:**
* Channels A, B, C: 10-600 Vrms max.
* Channel D: 1-60 Vrms max (low voltage range).
* Each channel input: +/- differential inputs from 60 to 600Vrms max.
* Accuracy: ±1% of reading ±0.05% of full scale for voltage measurements (with TASKCard PQPlus).
* Voltage Transients: 50-6000Vpk with a minimum duration of 1 microsecond (with TASKCard PQPlus). Accuracy: ±10% of reading ±1% of full scale.
* **Current Measurements:**
* Up to 3000 A depending on optional current probes (e.g., CT-10, CT-150, CT-300, CT-1000, CT-3000, LEMFLEX 3K).
* Accuracy: ±1% of reading ±0.05% of full scale (at fundamental, plus current probe accuracy).
* Current Transients: 1 to 300% of CT full-scale rating (except Chan D, 2-200%), 1 microsecond minimum duration (with TASKCard PQPlus). Accuracy: ±10% of reading ±1% of full scale plus probe accuracy.
* **Frequency:** Fundamental range 30 – 450 Hz. Accuracy: ±0.2% of reading.
* **Relay Contacts:** Four sets of relay contacts rated for 120 VAC at 1A max, 30 VDC at 1A max.
* **Digital Inputs:** Four channels, 12-48 VDC.
**Interfaces:**
* **Serial:** RS-232C DCE (DB-9 connector).
* **Parallel Port:** For PC connection.
* **Memory Card Interface:** Integral PCMCIA Type I (PC card) SRAM card slot for data storage (options for 512KB, 1MB, 2MB).
* **Relay Output:** Four sets of programmable relay contacts.
**Physical:**
* **Weight:** Approximately 21 lbs.
* **Operating Temperature:** 5 to 45 degrees Celsius (41 to 113° F).
* **Storage Temperature:** -20 to 55 degrees Celsius (-4 to 131° F).
**Compatibility:**
* **TASKCards:** Supports various TASKCards for expanded functionality, including PQPlus, 8000 (Energy/Harmonics), Inrush, and Flicker.
* **Software:** Supported by DRAN-VIEW PC analysis and report writing software. DRAN-LINK for PC interface via RS-232 or modem connection.
* **Current Probes:** Compatible with a range of Dranetz current probes (CT-10, CT-150, CT-300, CT-1000, CT-3000, ISO-1A, ISO-5, LEMFLEX 3K) and associated adapter cables.
### Why Choose Aumictech for Dranetz PP1/P?
At Aumictech, we specialize in supplying high-end power quality analysis equipment. Whether you need precise power quality monitoring, in-depth harmonic analysis, or detailed inrush current studies, our team ensures the Dranetz PP1/P delivers maximum performance for your critical applications.
