The Emerson Motion Control EP-225F-A is a 16-point digital output module for the PACSystems™ RSTi-EP remote I/O system. Each output delivers 0.5 A at 24 VDC with positive logic switching up to 1 kHz on resistive loads. The module integrates into distributed control architectures via PROFINET RT, PROFIBUS, Modbus TCP, and EtherCAT protocols, enabling high-density I/O placement at point-of-use locations to minimize wiring infrastructure. Operating across -20°C to +60°C, the EP-225F-A features individual channel diagnostics, status LEDs, and hot-swap capability for live module replacement. The system bus operates at 48 Mbps, reading up to 256 discrete I/O points in 20 milliseconds. Independent input and output power buses allow selective channel activation without full module power cycling.
## Technical Specifications
• **Output Configuration:** 16 channels, positive logic, 0.5 A @ 24 VDC per point, 1-Wire connection
• **Switching Capability:** Up to 1 kHz on resistive loads
• **Electrical Requirements:** 20.4–28.8 VDC input; 8 mA system bus consumption; 20–25 mA + load per output path
• **Communication Protocols:** PROFINET RT, PROFIBUS, Modbus TCP, EtherCAT
• **System Bus:** 48 Mbps transfer rate; reads 256 DI/DOs in 20 milliseconds
• **Physical Form:** 11.5 mm width, 76 mm depth, 120 mm height; DIN rail mount
• **Environmental:** -20°C to +60°C operating; -40°C to +85°C storage; 5–95% humidity (non-condensing)
## Key Features
• Individual channel status monitoring with dedicated LEDs
• Module-level diagnostics and status indication
• Hot-swap installation without system shutdown
• Plug-and-play connectivity
• Independent output power bus for selective channel control
• Compact, high-density form factor
## Agency Approvals
UL, UL HazLoc Class 1 Division 2, CE, ATEX Zone 2, TÜV SIL3, CCC, Marine DNV GL
## Compatibility & Integration
The EP-225F-A integrates exclusively within PACSystems™ RSTi-EP systems, supporting process, parameter, and diagnostic data exchange across multiple industrial networks.
