The Keysight (Agilent) E5062A ENA-L is a 2-port network analyzer operating from 300 kHz to 3 GHz, engineered for RF component characterization and circuit validation in R&D and manufacturing environments. It delivers 120 dB dynamic range, 0.001 dB RMS trace noise, and sub-millisecond sweep performance. The instrument combines precise magnitude (±0.1 dB) and phase (±0.5°) accuracy with flexible measurement capability across S-parameters, LCR, group delay, and power compression modes.
Technical Specifications
Frequency Performance
• Frequency Range: 300 kHz to 3 GHz
• Frequency Resolution: 1 Hz
• Frequency Accuracy: ±2.5 ppm at 25°C
• Frequency Stability: ±0.5 ppm/year
• Sweep Modes: Frequency, List
Measurement Capability
• Configuration: 2-port network analysis
• Dynamic Range: 120 dB at 1 GHz (S21 transmission)
• Trace Noise: 0.001 dB RMS at 1 GHz (S21)
• Magnitude Accuracy: ±0.1 dB
• Phase Accuracy: ±0.5 degrees
• Measurement Parameters: S11, S12, S21, S22, LCR, group delay, response, gain compression, power, swept power
• Calibration: Full 2-port and 1-port SOLT (Short, Open, Load, Through)
• IF Bandwidth: 10 Hz to 10 MHz (1-3-10 sequence)
Signal Generation & Detection
• Output Power Range: -60 dBm to +10 dBm
• Power Accuracy: ±0.5 dB at 1 GHz
• Output Impedance: 50 Ω
• Receiver Type: Dual-channel
• Detector Types: Logarithmic, Linear, Logarithmic power
Sweep Performance
• Sweep Time: 31 ms/point at 1 GHz (fast sweep mode)
• Data Points: Up to 1601 points per sweep
– Key Features
• Color LCD display with internal trace and settings memory
• Type-N female connectors (2× 50 Ω test ports)
• GPIB and USB control interfaces
• USB and optional Ethernet data transfer
– Typical Applications
Filter and amplifier characterization, impedance matching, component validation, transmission line analysis, gain and phase response measurement, power compression testing.
– Compatibility & Integration
Supports test port extenders, calibration kits, fixtures, and Agilent/Keysight VNA software for data analysis and remote control. AC power: 100–240 VAC, 50/60 Hz.
