The Keysight N7000A InfiniiMax III+ Series Probe Amplifier delivers 8 GHz bandwidth for high-speed differential bus probing. InfiniiMode technology enables simultaneous measurement of differential, single-ended (A or B), and common-mode signal components from a single probe connection. Each amplifier carries unique measured S-parameters that, combined with probe head S-parameters, provide precise AC correction and flattened magnitude and phase response across the measurement bandwidth.
Technical Specifications
• Bandwidth: 8 GHz
• Differential Input Impedance: 100 kΩ / 0.32 pF
• Impedance Profile: RCRC (optimized for low source impedance signals)
• Attenuation Range: 5:1 / 10:1
• Operating Temperature Range: 5°C to 40°C
• Probe-to-Oscilloscope Interface: AutoProbe 2 (3.5 mm connector)
– Key Features
• InfiniiMode technology for differential, single-ended A/B, and common-mode measurements
• Unique measured S-parameter data in each amplifier for individual AC correction
• Compatible with InfiniiMax III/III+ series probe heads including N2848A QuickTip, MX0109A Extreme Temperature Solder-in, N2836A Solder-in, and N5444A 2.92 mm/SMA configurations
• Direct connection to Infiniium 90000X/Q and V-Series oscilloscopes (software version 5.50 or higher)
• ESD-sensitive component requiring grounded wrist strap and static-safe handling
• Hot-swap probe head capability (except when DUT is not grounded to oscilloscope)
– Typical Applications
• Differential signal measurement and analysis
• Single-ended signal acquisition
• Common-mode component extraction from differential signals
• High-speed digital bus characterization
– Compatibility & Integration
Direct compatibility exists with Keysight Infiniium 90000X/Q and V-Series oscilloscopes. For 86100D oscilloscope integration, an N5477A adapter is required. InfiniiMax I and II probe heads are not compatible with this III+ amplifier; conversely, InfiniiMax III+ probe heads will not function with InfiniiMax I and II amplifiers.
