The TDK-Lambda GEN6-100 is a programmable DC power supply delivering 600 W across a 0 to 6 Vdc output range with continuously adjustable voltage and current up to 100 A. Built on modular SMT design and rated for single-phase AC input from 85 to 265 Vac (47–63 Hz), the unit achieves 0.99 typical power factor correction and 78% efficiency. Voltage ripple is held to 0.008 Vrms and current ripple to 0.2 Arms across the 5 Hz to 1 MHz bandwidth. Line and load regulation in constant voltage mode are typically 0.01% of output voltage plus 2 mV; constant current mode regulation is 0.01% of output current plus 2 mA.
## Technical Specifications
• Output: 0–6 Vdc at 0–100 A (600 W rated)
• Input: 85–265 Vac, 47–63 Hz, single-phase
• Voltage ripple noise: 0.008 Vrms (5 Hz–1 MHz)
• Current ripple noise: 0.2 Arms (5 Hz–1 MHz)
• Line regulation (CV mode): 0.01% Vo + 2 mV typical
• Load regulation (CV mode): 0.01% Vo + 2 mV typical
• Line regulation (CC mode): 0.01% Io + 2 mA typical
• Power factor correction: 0.99 typical
• Efficiency: 78% typical
## Key Features
• Over-voltage protection, under-voltage limit, and current limit foldback
• Remote sensing for output cable voltage drop compensation
• Last-setting memory preserves configuration across power cycles
• Parallel operation with active current sharing supports up to four units for increased current capacity
• Front panel encoders for voltage, current, and protection adjustment
• Remote ON/OFF and enable/disable control
• Analog programming via selectable 0–5 V or 0–10 V external input
## Interfaces & Integration
• Standard: RS-232, RS-485
• Optional: LAN (LXI compliant), USB, GPIB (IEEE 488.2 SCPI), isolated analog current control, isolated analog voltage control
• Package: 1U rack mount or benchtop (422.8 × 43.6 × 432.8 mm nominal; ~7 kg)
• Safety: IEC 61010-1, CSA C22.2 No. 61010-1, EN 61010-1, UL 61010-1; CE/UKCA compliant
