The LeCroy 314A WaveJet Performance Oscilloscope is a four-channel, 100 MHz instrument designed for signal analysis in laboratory and field environments. It delivers single-shot sampling to 1 GS/s and up to 100 GS/s via Random Intermittent Sampling (RIS) mode for fast transient capture. The 500 kpts/channel record length enables extended waveform recording, while the 7.5-inch color TFT-LCD display (640 x 480 VGA) provides clear simultaneous visualization of waveforms, measurements, and menus.
Technical Specifications
• Bandwidth: 100 MHz
• Channels: 4 analog inputs
• Sample Rate (Single-Shot): 1 GS/s maximum
• Sample Rate (RIS): 100 GS/s maximum
• Record Length: 500 kpts per channel
• Peak Detect Period: 1 ns
• Equivalent Time Sampling: Capable of capturing events as small as 1 ns
• Vertical Resolution: 8 bits
• Vertical Sensitivity: 2 mV/div to 10 V/div
• Vertical Gain Accuracy: ±(1.5% + 0.5% of full scale)
• Bandwidth Limiters: 20 MHz
• Input Coupling: GND, DC 1 MΩ, AC 1 MΩ
• Input Impedance: 1 MΩ ±1.5% || 20 pF
• Maximum Input Voltage: 400 V CAT I
• Timebase Range: 5 ns/div to 50 s/div
• Timebase Accuracy: 10 ppm typical
• Roll Mode: 50 ms/div to 50 s/div (100 kS/s maximum)
• Display: 7.5″ color flat-panel TFT-LCD, 640 x 480 VGA
• Power-Up Time: Less than 3 seconds
• Dimensions: 190 mm H × 285 mm W × 102 mm D
• Weight: 3.2 kg
– Key Features
• Edge, Glitch, Period, Pulse Count, and TV triggering modes
• 26 automatic measurement parameters including frequency, rise time, fall time, duty cycle, and FFT analysis
• Math functions: Sum, Difference, Product
• Auto Setup and intensity/replay control
• Multi-language user interface with built-in help
– Connectivity
• USB Host and Device ports for direct printing and data storage via memory stick
• Optional GPIB and LAN interfaces for remote operation and data transfer
