The LeCroy AP031 is a high-voltage differential probe that measures differential signals in circuits with high common-mode voltages present. It enables direct measurement between two circuit points without ground reference, eliminating ground loops and signal interference while rejecting common-mode signals with precision. The probe operates across a 15 MHz bandwidth and supports dual attenuation ranges, making it suitable for power electronics, switched-mode supplies, and high-voltage circuit analysis where reference voltage may float significantly above or below ground.
Technical Specifications
Measurement Range:
• 1:100 attenuation: ±700 V (DC + peak AC) or 500 V r.m.s. differential mode; ±700 V common mode
• 1:10 attenuation: ±70 V (DC + peak AC) or 50 V r.m.s. differential mode
• Maximum absolute voltage: ±1400 V (DC + peak AC) or 1000 V r.m.s.
Electrical Characteristics:
• Bandwidth: 15 MHz (–3 dB)
• Input impedance: 4 MΩ
• Input capacitance: 5.5 pF total; 10 pF each side to ground
• Output offset (typical): < ±5 mV
• Output noise (typical): 1.5 to 2 mV
• Common-mode rejection: 86 dB @ 50 Hz, 66 dB @ 20 kHz, 56 dB @ 200 kHz
Physical & Environmental:
• Dimensions: 168 mm × 62 mm × 20 mm
• Weight: 42 g (probe only); 285 g (with batteries and casing)
• Cable: 1.3 m total; BNC 95 cm (RG58/U), input lines 45 cm
• Operating temperature: -10°C to 40°C
• Storage temperature: -30°C to 70°C
• Operating altitude: up to 2000 m
• Power: four 1.5 V AA batteries or 6 V d.c. / 60 mA mains adapter
– Key Features
• Dual attenuation modes (÷10, ÷100) accommodate wide measurement ranges
• 4 MΩ input impedance minimizes circuit loading
• Low input capacitance (5.5 pF) preserves signal integrity
• CAT III rated; EN61010-1:2010 and EN61010-031/A1:2008 certified
• Battery or external supply operation
• Includes two color-coded safety hooks (4 mm compatible)
– Compatibility & Integration
Connects directly to any 1 MΩ input oscilloscope. Requires optional AP-1M adapter for 50 Ω only inputs. BNC output standard.
Status: Obsolete. Replacement model: T3HVD1500-70.
