The LeCroy T3PS30063P is a triple-output programmable DC power supply delivering independent, isolated outputs for precision testing across development, manufacturing, and research environments. Channels 1 and 2 provide 0–30 V at 0–6 A with constant voltage and constant current modes, while Channel 3 offers fixed voltage outputs (1.8 V, 2.5 V, 3.3 V, or 5 V) at up to 5 A. Both programmable channels support electronic load functionality and can be configured in series (up to 60 V) or parallel (up to 12 A) operation via internal tracking without external wiring. The unit delivers 385 W maximum output power with exceptional low-ripple noise (≤1 mVrms) and transient recovery under 100 μs.
Technical Specifications
Output Capability
• Channel 1 & 2: 0–30 V / 0–6 A, CV and CC modes
• Channel 3: Fixed 1.8 V / 2.5 V / 3.3 V / 5 V at 5 A max
• Series operation: Up to 60 V tracking
• Parallel operation: Up to 12 A tracking
• Total power: 385 W
Performance
• Output ripple noise: ≤1 mVrms
• Transient recovery time: ≤100 μs
• Programming resolution: 1 mV / 0.1 mA
• Read-back resolution: 0.1 mV / 0.1 mA
• Voltage regulation (line): 0.01% + 3 mV
• Voltage regulation (load): 0.01% + 5 mV
• Current regulation (line/load): 0.01% + 3 mA
• Voltmeter accuracy: 0.03% + 10 mV
• Ammeter accuracy: 0.3% + 10 mA
– Key Features
• 4.3-inch TFT LCD with multi-channel display of settings, measurements, and waveforms
• USB, RS-232, LAN, and Ext I/O programmable interfaces
• Over Voltage, Over Current, Over Temperature, and Under Voltage Lockout protection
• Monitor function with configurable alarms and output control
• Output recorder saves voltage/current data as .REC or .CSV files
• Sequential output mode with 8 built-in template waveforms
• 10 memory slots for sequence, delay, recorder, and panel configurations
• Independent output control per channel
• Panel lock functionality
– Typical Applications
Component characterization, power management IC testing, battery simulation, electronic load validation, and automated production test environments requiring multiple isolated voltage rails with precision regulation.
– Compatibility & Integration
Standard bench-top unit (14.764″ × 8.346″ × 5.118″) operates from 85–265 VAC input. Remote control via USB, RS-232, LAN, and external I/O enables integration into automated test systems.
