LeCroy WaveJet 332 Digital Oscilloscope, 350MHz, 2 Channel

The LeCroy WaveJet 332 is a 350 MHz, 2-channel digital oscilloscope engineered for signal analysis and waveform capture in laboratory and field environments. It delivers a maximum real-time sampling rate of 2 GS/s (1 GS/s across all channels) with memory depth of 500 kpts per channel, supporting capture times up to 250 µs at 2 GS/s. Equivalent-time sampling extends capability to 100 GS/s for detailed transient analysis. The 7.5-inch color VGA display (640 × 480 pixels) presents waveforms, measurements, and menus with clarity. Vertical resolution is 8-bit with sensitivity from 2 mV/div to 10 V/div. Advanced triggering includes edge, glitch, period, pulse width, pulse count, and TV (NTSC, PAL, custom) modes across any channel or external source. Acquisition modes encompass averaging (up to 256 sweeps), peak detect (1 ns period), standard, and RIS. On-board analysis includes 26 automatic measurements, FFT (up to 8 kpts with Rectangular, Von Hann, or Flat Top windowing), waveform math (sum, difference, product), and a 6-digit frequency counter. Replay mode enables scrolling through 1024 acquired waveforms to isolate anomalies. Input impedance options are 1 MΩ || 20 pF, 1 MΩ || 16 pF, or 50 Ω ±1.5%. Input coupling includes GND, DC 1 MΩ, AC 1 MΩ, and 50 Ω. Maximum input voltage is 400 V CAT I (5 Vrms at 50 Ω). Rise time is 1.00 ns. Bandwidth limiting filters at 20 MHz and 200 MHz reduce noise. Front-panel USB 1.1 enables direct data export to memory sticks; rear-panel USB supports printing. Optional GPIB and Ethernet interfaces provide remote control and automation. Powered by 400 V CAT I input. Compact form factor weighs 7 lbs (3.2 kg).