The Newport 4832-C is a PC-based multi-channel optical power meter delivering precise, NIST-traceable measurements across 1 to 4 configurable channels. A remote break-out box positioned up to 30 feet from the host PC isolates sensitive analog circuitry from electrical noise, enabling high-accuracy readings. Dual A/D converters—12-bit for high-speed acquisition and 15-bit for precision DC measurements—support sampling rates to 3500 Hz (single-channel, 12-bit) and 15 Hz (15-bit resolution). The instrument connects via ISA bus plug-in card and accepts Newport 818 Series low-power detectors in both free-space and fiber-pigtailed configurations. Output data transfers directly to the PC for unit conversion and post-processing in Watts, Amps, dB, or dBm. LabVIEW, DOS C, and Windows DLL drivers enable integration with 486 and Pentium systems.
Technical Specifications
• Channels: 1 to 4 configurable
• Sampling Rate: Up to 3500 Hz (12-bit, single-channel); 15 Hz (15-bit resolution)
• A/D Resolution: 12-bit high-speed; 15-bit integrating
• Wavelength Range: 190 nm to 1800 nm
• Measurement Units: Watts, Amps, dB, dBm
• Calibration: NIST traceable
• System Extension: Break-out box to 30 feet via cable
– Key Features
• Dual A/D converter architecture for simultaneous fast and precision measurements
• Remote break-out box isolates analog sensing from PC electrical noise
• Compatible with Newport 818 Series detectors (Ge, Si, InGaAs)
• Supports both free-space and fiber-pigtailed detector configurations
• Direct A/D data and range information transfer to host PC
– Typical Applications
• Multi-point optical power monitoring across wavelength range 190–1800 nm
• High-resolution DC power characterization requiring 15-bit precision
• Fast transient acquisition at 12-bit resolution up to 3500 Hz
• Remote measurement setups leveraging 30-foot cable extension
– Compatibility & Integration
• PC Interface: ISA bus plug-in card
• Detector Interface: Newport 818 Series pre-amplifier boards in break-out box
• Software Drivers: LabVIEW, DOS C, Windows DLL
• Host CPU: 486 or Pentium
• Rack Mounting: Optional 19-inch kit accommodating one or two break-out boxes
