The NI 6110-A1DB is a multifunction DAQ expansion module that adds simultaneous analog input, analog output, digital I/O, and counter/timer channels to existing PCI-based systems. Built on the S Series platform, this full-length PCI card delivers high-bandwidth acquisition and control capabilities through a dedicated ADC per channel architecture and configurable triggering options.
Technical Specifications
Analog Input
• 4 channels, 12-bit resolution
• 5 MS/s simultaneous sampling per channel
• Eight selectable ranges: ±0.2 V to ±42 V
• AC or DC coupling, configurable per channel
• 100 MΩ || 10 pF input impedance
• ±42 V overvoltage protection
• Dedicated ADC per channel
Analog Output
• 2 channels, 16-bit resolution
• 4 MS/s single channel; 2.5 MS/s dual channel
• ±10 V output range
Digital I/O
• 8 channels, 5 V/TTL compatible
• Programmable as input or output
Counter/Timer
• 2 channels, 24-bit resolution
• 20 MHz maximum frequency
Triggering: Analog and digital trigger support with RTSI/PXI multidevice synchronization and PFI software-controlled routing.
– Key Features
• 68-pin SCSI II connector for standard DAQ cabling
• PCI bus interface with full-length form factor
• Power: +5 VDC @ 2.5 A
• Operating temperature: 0 °C to 45 °C
• Storage temperature: –20 °C to 70 °C
• Relative humidity: 5% to 90% (non-condensing)
– Typical Applications
42 V automotive measurements, radar/sonar/ultrasound systems, transient and ballistics analysis, high-energy physics experiments, and IF digitization.
– Compatibility & Integration
NI-DAQmx driver software and Measurement & Automation Explorer (MAX) configuration utility supported. Compatible with PC AT and Macintosh computers with PCI bus architecture.
