The Power Ten P62B-30100 is a programmable DC power supply delivering up to 3 kW of continuous output power. Built on PWM and zero-crossing topology, it provides 0–30 VDC at 0–100 A with exceptional regulation and transient response for demanding test, industrial, and research applications.
Technical Specifications
Electrical Output
• Voltage: 0–30.0 VDC
• Current: 0–100.00 ADC
• Maximum Power: 3000 W continuous
• Regulation (line/load): ±0.1% voltage, ±0.2% current
• Transient Response: 30% current step recovers to ±2% within 10 ms
• Stability: ±0.05% per 8 hours (after 30 min warm-up)
• Temperature Coefficient: 0.02%/°C
• Ripple and Noise: 75 mV peak-to-peak (typical)
Input Power
• Standard: 208 VAC, 54 A typical at 3 kW output
• Optional: 360–440 VAC or 432–528 VAC
• Frequency: 47–63 Hz
• Source: Delta or Wye compatible
Control & Monitoring
• Local: Dual 10-turn potentiometers for voltage and current
• Display: Simultaneous voltage and current readout
• Remote (rear panel): Contact closure on/off (6–120 VDC, TTL/CMOS), voltage/current monitor, OVP limit set, fault status
• Optional: IEEE 488.2 and RS-232 with SCPI protocol for computer control
– Key Features
• Single output stage with continuously variable 0–30 VDC at 100 A
• High-efficiency switching design (PWM, zero-crossing topology)
• Tight load/line regulation for precision applications
• Fast transient recovery meets dynamic test requirements
• Dual-mode local and remote programmability
• Multi-source input flexibility (single-phase 208 VAC standard; three-phase options available)
– Typical Applications
• Semiconductor burn-in and ATE systems
• Industrial process control
• Medical device testing
• High-power laser systems
• Battery charging and electromagnet excitation
• Ion implant and radar systems
• Research laboratory power delivery
– Compatibility & Integration
Front-panel potentiometer control suits standalone benchtop operation. Rear-panel analog monitoring and contact-closure switching enable integration into larger test racks. Optional SCPI over IEEE 488.2 and RS-232 supports automated multi-unit systems and data logging.
