The Rohde & Schwarz HMO1002 is a benchtop digital oscilloscope combining analog and digital measurement in a single instrument. It delivers simultaneous acquisition of 2 analog channels and 8 logic channels with mixed-signal analysis, making it suitable for embedded systems debugging, R&D, and educational environments. The instrument integrates function generation, pattern generation, FFT analysis, and hardware-based serial bus triggering and decoding.
Technical Specifications
Analog Channels: 2 channels with 1 mV/div vertical sensitivity and low-noise A/D conversion.
Digital Channels: 8 logic channels (MSO capability standard).
Bandwidth: 50 MHz, 70 MHz, or 100 MHz configurations with upgrade capability.
Sampling Rate: Up to 1 Gsample/s.
Memory Depth: 1 Msample per channel.
Timebase Accuracy: ±50.0 × 10⁻⁶ aging, ±10.0 × 10⁻⁶ per year.
Display: 6.5″ VGA TFT.
Memory Zoom: Up to 50,000:1 horizontal magnification.
– Key Features
• Automatic measurements on up to 28 parameters with QuickView function.
• FFT analysis with selectable algorithms (Hamming, Hanning, Blackman, Rectangular) over 128,000 test points, applicable to stored waveforms.
• Integrated three-digit digital voltmeter enabling simultaneous measurement of primary and secondary voltage values per channel.
• Hardware-based triggering and decoding for I²C, SPI, UART/RS-232, CAN, and LIN (optional upgrade activation).
• Pattern Generator: up to 50 Mbit/s with arbitrary editor for custom serial protocol patterns.
• Function Generator: up to 50 kHz with DC, sine, square, triangle/ramp, and pulse waveforms.
• Mask test functionality for waveform compliance validation.
• Component tester and QuickMath tools.
– Typical Applications
Embedded system debugging, mixed-signal circuit analysis, educational instruction, protocol validation, and general electronic measurement.
– Compatibility & Integration
Ethernet, USB, and USB flash drive connectivity support. Remote operation via SCPI commands.
