The Tektronix 2467 is a four-channel analog oscilloscope engineered for high-speed waveform acquisition and analysis of fast, single-shot events. Featuring exceptional writing speed and a Microchannel Plate (MCP) CRT display, this instrument delivers precise capture of transient phenomena critical to research, development, and field service applications.
Technical Specifications
Bandwidth & Channels
• DC to 350 MHz (2467 model); DC to 400 MHz (2467B model)
• Four vertical channels with independent AC/DC coupling
• Vertical sensitivity: 2 mV/div to 5 V/div (Channels 1–2); 0.1 V or 0.5 V/div (Channels 3–4)
• Input impedance: 1 MΩ ±5% with 15 pF ±2 pF, or 50 Ω selectable
• Channel isolation: ≥100:1 at 100 MHz (CH 1–2); ≥50:1 at nominal bandwidth (CH 1–2); ≥50:1 at 100 MHz (CH 3–4)
• AC-coupled lower –3 dB point: 10 Hz or less
Horizontal System
• Sweep speed range: 0.5 sec/div to 5 ns/div; extends to 500 ps/div with ×10 magnification
• A Sweep: 500 ms/div to 5 ns/div
• B Sweep: 50 ms/div to 5 ns/div
• Time interval resolution: 20 ps
• Timing resolution: 500 ps/div
• Continuously variable timing control with 2% accuracy between settings
• Chop mode switching: 2.5 MHz ±0.2% (20 µs/div to 2 ps/div); 1 MHz ±0.2% (other speeds)
Trigger System
• Bandwidth: DC to 500 MHz
• Trigger sensitivity from CH 1–2: 0.35 div (DC coupled, ≤50 MHz); increases to 1.5 div at 500 MHz
• Trigger sensitivity from CH 3–4: 50% of CH 1–2 requirements
• Level control range: ±18 times V/div (CH 1–2); 19 times V/div (CH 3–4)
• On-screen trigger level readout; automatic triggering; internal/external source selection
Display
• Microchannel Plate (MCP) CRT
• 8-bit vertical resolution (2467B model)
– Key Features
• Dual time base (A and B sweeps) with independent magnification
• Switchable input coupling and impedance for versatile signal conditioning
• Wide trigger bandwidth handles signals to 500 MHz
• Exceptional writing speed captures single-shot high-speed transients
– Typical Applications
• Fast transient analysis in research and development
• High-frequency signal characterization
• Field service and troubleshooting of high-speed circuits
– Compatibility & Integration
Channels 1 and 2 support standard accessory probes with improved AC-coupled low-frequency response (1 Hz or less).
