The Teledyne LeCroy T3LCR1002 is a high-precision LCR meter delivering 0.05% basic accuracy across impedance measurements from 10 Hz to 2 kHz. Built for R&D, production, and automated testing environments, this benchtop instrument measures impedance parameters including Z, D, Q, inductance (Lp, Ls), resistance (Rp, Rs, DCR), and capacitance (Cp, Cs) with simultaneous four-parameter display on a 3.5-inch color LCD.
Technical Specifications
Measurement Range & Accuracy
• Frequency range: 10 Hz to 2 kHz
• Frequency accuracy: ±0.01%
• Basic accuracy (Slow/Medium): 0.05%
• Basic accuracy (Fast): 0.1%
• Test speeds: Fast (25 ms), Medium (100 ms), Slow (333 ms)
• Internal DC bias: ±2.5 V, adjustable
Signal Levels
• AC voltage: 10 mV to 2 V (±10%)
• AC current: 100 µA to 20 mA (±10%)
• CV mode: 10 mV to 2 V (±6%)
• CC mode: 100 µA to 20 mA (±6%)
• Output impedance (selectable): 30 Ω, 50 Ω, 100 Ω
Measurement Parameters
Primary/Secondary: Z, D, Q, Lp, Ls, Rp, Rs, Cp, Cs, DCR
Monitoring: Z, D, Q, Vac, Iac, Δ, Δ%, θr, θd, R, X, G, B, Y
– Key Features
• PASS/FAIL judgment and 9-bin comparator sorting
• Auto Level Control (ALC) for signal stability
• List measurement: up to 10 frequency or amplitude points
• Averaging: 1 to 256 times
• Trigger modes: Internal, Manual, External, BUS (RS-232/USB)
• Trigger delay: 0 ms to 60 s
• Fixture zeroing: full frequency range or spot frequency
• Data storage: 10,000 internal data points (.csv), USB backup with 9999 file capacity
• Screen capture to USB (BMP format)
– Interfaces & Form Factor
• RS-232C with SCPI protocol support
• USB and USB storage connectivity
• Handler output: 10-bin sorting for external equipment control
• Dimensions: 265 mm × 107 mm × 312 mm (2U, 1/2 rack)
• Weight: ~3 kg
• Power: 100–240 VAC, 50–60 Hz; maximum 15 W or 30 W consumption
– Typical Applications
Component characterization, quality assurance testing, automated production testing, and impedance verification across audio, power, and RF component development.
