The Teledyne LeCroy T3SA3200 is a benchtop spectrum analyzer delivering signal analysis from 9 kHz to 3.2 GHz with 1 Hz frequency resolution and all-digital IF technology. Built for engineers and laboratory professionals, this instrument measures spectral content with exceptional sensitivity (−161 dBm/Hz typical DANL) and phase noise performance, supporting applications spanning R&D, production testing, signal monitoring, interference analysis, and EMI pre-compliance verification.
Technical Specifications
Frequency and Resolution
• Frequency range: 9 kHz to 3.2 GHz
• Frequency resolution: 1 Hz
• Resolution bandwidth (RBW): 1 Hz to 1 MHz in 1-3-10 sequence
• Reference frequency: 10.000000 MHz
Signal Measurement
• Displayed Average Noise Level (DANL): −161 dBm/Hz (typical, 1 Hz normalized)
• Phase noise: < −98 dBc/Hz @ 10 kHz offset; < −96 dBc/Hz @ 100 kHz offset; < −115 dBc/Hz @ 1 MHz offset (all typical at 1 GHz)
• Total amplitude accuracy: < 0.7 dB
Hardware and Display
• IF architecture: All-digital
• Built-in switchable preamplifier for enhanced small-signal sensitivity
• 10.1 inch WVGA color display (1024 × 600), matte finish
• Input connectors: N-female, BNC-female
Connectivity and Control
• USB Host and Device
• LAN with VXI-11, Sockets, and Telnet protocol support
• Network configuration via DHCP or Static IP
Physical and Environmental
• Dimensions: 393 mm W × 207 mm H × 116.5 mm D
• Weight: 4.6 kg
• Automatic AC power selection (CAT II per IEC/EN 61010-1:2015)
• Indoor use, Pollution Degree 2
– Key Features
• 1 Hz minimum resolution bandwidth for detailed spectral characterization
• Integrated preamplifier switchable for improved dynamic range on weak signals
• All-digital IF eliminates spurious responses and drift
• LAN and USB interfaces for automated test environments and remote operation
– Typical Applications
• Research and development signal characterization
• Production RF testing and validation
• Real-time signal monitoring and frequency surveillance
• Interference identification and source location
• EMI pre-compliance screening
– Optional Measurement Capability
Tracking Generator Kit (to 3.2 GHz), Reflection Measurement Kit, Advanced Measurement Kit (channel power, adjacent channel power ratio, occupied bandwidth, third-order intercept), and EMI Pre-compliance Test Kit enhance measurement scope.
