The Advantest R3371 is a portable spectrum analyzer spanning 100 Hz to 26.5 GHz, engineered for signal analysis, component testing, and electromagnetic compatibility (EMC) evaluation. This instrument delivers 110 dB dynamic measurement range with tracking generator, 120 dB display dynamic range, and ±1 dB total level accuracy. The built-in tracking generator operates from 100 kHz to 3.6 GHz with output levels from -3 dBm to -30 dBm and ±0.5 dB accuracy at 25 MHz reference conditions. Phase noise performance reaches -110 dBc/Hz at 10 kHz offset below 2.6 GHz.
Technical Specifications
• Frequency Range: 100 Hz to 26.5 GHz with 1 Hz resolution
• Total Level Accuracy: ±1 dB
• Dynamic Measurement Range: 110 dB (with tracking generator)
• Display Dynamic Range: 120 dB
• Phase Noise: -110 dBc/Hz at 10 kHz offset (≤2.6 GHz)
• Tracking Generator: 100 kHz to 3.6 GHz, -3 dBm to -30 dBm output, ±0.5 dB accuracy (25 MHz, -10 dBm, 25°C ±10°C)
• Tracking Generator Flatness: ±3.0 dB (100 kHz to 3.6 GHz)
• Tracking Generator Spurious: Harmonic –15 dBc max., Non-harmonic –25 dBc max.
• Tracking Generator Dynamic Range: -110 dBm (1–3 GHz), -100 dBm (3–3.6 GHz)
• Marker Capability: Delta, peak, and 8-point multimarker support
• Time Base Accuracy: ±10 ppm
• Display: 10.4-inch TFT LCD, 800 × 600 pixels, touch panel
• Mass: ≤21 kg (46.3 lbs)
• Dimensions: 424 (W) × 221 (H) × 500 (D) mm
• Storage: 3.5-inch floppy drive, 6 GB+ hard disk
• Operating Environment: +5 to +40°C, 40–85% RH (non-condensing)
– Key Features
• Built-in BASIC controller for automated measurement systems and data logging
• RBW calibration for enhanced total power measurement accuracy
• User-defined functions and measuring window capability
• Auto-switching AC input (100–120 VAC or 220–240 VAC, 50/60 Hz)
• Power consumption ≤160 VA
– Typical Applications
• Component characterization and signal analysis
• EMC testing and compliance verification
• Multicarrier signal measurement
• Spectral purity assessment
– Compatibility & Integration
IEEE 488.2 GPIB, Ethernet (10 Base-T), and USB interfaces enable integration into automated test systems. D-sub 25-pin parallel connector supports legacy equipment configurations.
