The Yokogawa FG410 is a single-channel arbitrary/function generator delivering precise waveform generation up to 30 MHz for sine waves. It generates sine, square, pulse, ramp, parameter-variable, noise, DC, and arbitrary waveforms with 16-bit amplitude resolution and 120 MS/s sampling rate. The unit supports continuous, modulation, sweep, burst, and sequence operating modes with advanced capabilities including AM, FM, PM, FSK, PSK, and PWM modulation. Isolated outputs reach 20 Vp-p (open circuit) or 10 Vp-p (50 Ω load), with maximum isolated voltage to 42 V. Arbitrary waveform memory accommodates up to 512 K words per waveform, while internal storage holds 128 waveforms totaling 4 M words. The FG410 integrates with Yokogawa ScopeCorder and DL Series oscilloscopes via XviewerLITE for direct waveform data transfer. Multi-unit synchronization supports up to 6 units for 12-channel output. External 10 MHz frequency reference input ensures timing accuracy across networked systems. GPIB and USB interfaces enable instrument control and data exchange. The compact 216 × 88 × 332 mm chassis weighs 2.1 kg and operates from 100–230 V AC, 50/60 Hz, making it suitable for power electronics, automotive, and communications development requiring floating circuit topologies, motor drives, inverters, and power supply characterization.
Technical Specifications
• Frequency Range: 0.01 µHz to 30 MHz (sine); up to 15 MHz (square/pulse); up to 5 MHz (other waveforms)
• Amplitude Resolution: 16 bits
• Sampling Rate: 120 MS/s
• Output Voltage: 20 Vp-p (open); 10 Vp-p (50 Ω load); up to 42 V isolated
• Arbitrary Waveform Memory: 512 K words per waveform
• Internal Waveform Storage: 128 waveforms, 4 M words total
• Power Supply: 100–230 V AC, 50/60 Hz
• Dimensions: 216(W) × 88(H) × 332(D) mm; Weight: 2.1 kg
– Key Features
• 25 parameter-variable waveforms with adjustable settings
• Five oscillation modes: continuous, modulation, sweep, burst, sequence
• Modulation types: AM, FM, PM, FSK, PSK, PWM
• Sweep modes: frequency, phase, amplitude, DC offset, duty (linear/log)
• Burst modes with phase control; sequence mode up to 255 steps
• Isolated output topology for floating circuit development
• Multi-unit synchronization: up to 6 units for 12 output channels
• External 10 MHz reference input/output for frequency locking
• TTL sync output for trigger and marker signals
• 3.5-inch TFT LCD display
– Typical Applications
• Power electronics and inverter design
• Automotive signal simulation and ECU testing
• Communications protocol development
• Motor drive characterization
• Power supply validation
– Compatibility & Integration
• GPIB and USB (Type A/B) interfaces
• Waveform data transfer from Yokogawa ScopeCorder and DL Series oscilloscopes
• XviewerLITE software support
• Multi-unit synchronization architecture
