The Acromag IP440-2 is a 32-channel optically isolated digital input module for industrial automation systems. It monitors discrete signals across four 8-channel ports, each isolated from logic and from each other. The module protects control systems from electrical noise and ground loops, supporting bipolar input voltages from ±16 to ±40V DC or AC peak. Input thresholds, debounce times, and polarity are software-programmable, eliminating hardware configuration.
Technical Specifications
Input Characteristics
• 32 optically isolated digital input channels organized into four 8-channel ports
• Bipolar input voltage range: ±16 to ±40V DC or AC peak
• Input threshold (IP440A-2): ±6.8V typical
• Input response time: 10µS typical (off to on), 15µS typical (on to off)
• Selectable debounce: 4µS, 64µS, 1mS, or 8mS
• Improved input hysteresis for noise immunity
• Software-programmable polarity for positive or negative transitions
• Change-of-state interrupts supported via paired channels
• Reverse polarity protection included
Isolation and Protection
• Optical isolation across all 32 channels
• Port-to-port isolation and logic-to-field isolation
• Voltage isolation rated 250V AC rms / 250V DC continuous
• 1500V AC dielectric strength test (1 minute, no breakdown)
• ±2.5kV ESD protection
System Interface
• Industry Pack (IP) module compatible with standard IP carrier cards
• Conforms to ANSI/VITA 4-1995 specifications
• 0 wait states (250ns cycle) at 8MHz clock
• Four 8-bit reads required to update all channels
• Software configuration; 200mS maximum configuration time after power-up
Environmental
• Operating temperature: 0 to 70°C
– Key Features
• Port-level isolation eliminates ground loop issues
• Programmable debounce and polarity reduce firmware complexity
• Fast input response times (10-15µS) capture rapid state changes
• Interrupt-capable architecture for event-driven applications
• No jumpers or DIP switches required
– Typical Applications
• Discrete signal monitoring in PLC and DCS environments
• Industrial process control with high electrical noise immunity
• Safety-critical systems requiring galvanic isolation
• Multi-source signal acquisition in distributed automation
– Compatibility & Integration
The IP440-2 integrates with any standard Industry Pack carrier board supporting VITA 4-1995. It interfaces directly with PLCs, DCS platforms, and embedded control systems. The module is a successor to the IP440, offering performance and feature enhancements.
