The Agilent/Keysight 6033A is a 200W autoranging DC power supply engineered for demanding test and measurement systems. It delivers 0–20V and 0–30A across three autoranging output configurations, with maximum power output of 240W. The unit operates in constant voltage and constant current modes, supported by precise programming and readback accuracies. Voltage programming accuracy is 0.035% + 9 mV; current programming accuracy is 0.15% + 20 mA. Readback accuracy for voltage is 0.07% + 6 mV and for current is 0.3% + 25 mA, all measured at 25°C ±5°C. Output noise is kept to 3 mV RMS and 30 mV peak-to-peak across the 20 Hz to 20 MHz band, with current ripple at 30 mA RMS.
Technical Specifications
Output Ratings
• Voltage: 0–20V DC
• Current: 0–30A DC
• Maximum Power: 240W
• Autoranging configurations: 20V/10A, 14V/17.2A, 6.7V/30A
Accuracy (at 25°C ±5°C)
• Voltage programming: 0.035% + 9 mV
• Current programming: 0.15% + 20 mA
• Voltage readback: 0.07% + 6 mV
• Current readback: 0.3% + 25 mA
Output Noise (20 Hz–20 MHz)
• Voltage RMS: 3 mV
• Voltage peak-to-peak: 30 mV
• Current RMS: 30 mA
Input & Environmental
• Input voltage: 120V AC
• Operating humidity: up to 95% relative humidity
• Operating altitude: up to 2000 meters
• Installation category II; pollution degree 2
Physical Dimensions
• 212.3 mm (W) × 177.0 mm (H) × 516.4 mm (D)
– Key Features
• Autoranging output across three voltage/current ranges
• Constant voltage and constant current operation modes
• Built-in output voltage and current measurements
• Overvoltage and overcurrent protection
• Analog/resistance control for output programming
– Integration & Control
The 6033A integrates via GPIB interface with full SCPI command support and VXI Plug & Play drivers. Multiple supplies can be connected through a single GPIB address using the serial link option, supporting up to 16 units in series or auto-parallel configurations for extended voltage and current capability.
